Electronics Forum | Tue Feb 13 13:49:57 EST 2007 | coop
I am talking about an internal tray holder It holds two trays. the lingo doesn't really matter because if you say Internal tray feeder/holder the guys at philips will know exactly what you're talking about. I checked several refurb places and the onl
Electronics Forum | Fri Oct 17 15:23:28 EDT 2014 | davef
First, don't exceed the maximum temperature of the battery, say 85*C [I don't know your specifics] Second, don't short the terminals of the battery. Third, the best way to wave solder a battery is: * Insert an insulating tab between the battery an
Electronics Forum | Tue Jan 30 10:20:20 EST 2007 | mee
you need to clean the holders
Electronics Forum | Thu Oct 04 16:12:52 EDT 2007 | mike007
Use dedicated stencils & gold or green squeegee holders
Electronics Forum | Fri Jan 25 09:19:43 EST 2008 | realchunks
Use a fuse holder. It should work the same.
Electronics Forum | Mon Mar 24 06:40:57 EDT 2008 | robi
Hi we have some in stock but not many thanks R
Electronics Forum | Mon Dec 20 12:10:39 EST 2004 | Bob Atkinson
You can get the bulbs already mounted in the holder from RoyonicUSA (www.royonicusa.com). They are $79.00, part number 212. If you try to buy a bulb and align it in the holder, you probably won't be successful as the bulbs are factory mounted and a
Electronics Forum | Thu May 12 07:27:51 EDT 2005 | Frank56
Hi Amejia, Do you can try my silly idea by using some connector header with plastic holder type cut and preparation by number of pin same as number of hole you want to mask and insert thru the pcb hole before you coat or may be you can use some type
Electronics Forum | Mon Jun 24 14:52:40 EDT 2013 | ryansmta
I am in need of two Fuji or Panasonic "tape and reel" holders. I will be using them to hold dummy 0402 and 0201 outline components which have undergone some special treatment and packaged in tape and reel. This is not for SMT application but for s
Electronics Forum | Thu Jul 31 14:07:44 EDT 2014 | kurtiss
I found a bad solenoid and replaced it solenoid 15 on station 11. The machine is still erroring out. I also checked the holders and sensors and they seem to be ok. This error occurs when ever the machine tries to change nozzle sizes on any holder. T