Electronics Forum | Tue Feb 08 15:05:22 EST 2005 | Keith Lengling
I have several memory devices that have 2% bismuth in the lead coating. Is this enough bismuth to be concerned over the formation of a low temperature SnPbBi alloy? What are the allowable limits for bismuth in an SnPb process for both SMT and through
Electronics Forum | Tue Feb 08 22:04:34 EST 2005 | davef
Tough to say. Can you accept the loss of strength of your solder connection if upto 2% of the solder is affected? * Lead and bismuth alloys can form a eutectic composition of Bi52Pb32Sn16 in the grain boundaries. * Melting point of the eutectic all
Electronics Forum | Thu Aug 29 15:09:23 EDT 2013 | bvdb
Hi, Yes, there is a board marked "Memory Board" but it does not actually contain any memory. The memory card is attached to the CPU card. The board marked "Memory" is a board that allows you to plug in a Compact Flash (CF) memory card which we do
Electronics Forum | Sun Jun 26 21:52:15 EDT 2005 | thaqalain
After inserting 128 MB,168 Pin,PC100-222-620 (AZEN RAM)(taken out from another computer) alongside present Kingston KVR133x64C3/128,this data is copied from Systeminfo.txt file and for your kind review/suggestions. Total Physical Memory: 126 MB
Electronics Forum | Thu Jan 11 14:24:43 EST 2001 | Kris W
Hello all! I am writing this because my memory is failing (the organic memory). In a previous lifetime I remember seeing a brochure accompanied by a CD advertising a screen printer head similar to the Proflow and Rheometric pump, but made by a diff
Electronics Forum | Fri Jun 24 13:34:41 EDT 2005 | thaqalain
I have Intel� Pentium �4: BIOS VER: LY84510A.86A.0029.P11 Processor:X86Family15 Model 1 Stepping Processor Speed: 1.8 GHz System Bus Speed: 400 MHz System Memory Speed: 133MHz Cache RAM: 256KB Total Memory: 127MB (76%Load) DIMM Memory Connect
Electronics Forum | Tue Jul 03 09:13:18 EDT 2001 | rstodd
I work for a memory module manufacturer and I am interested in obtaining information on typical first-pass yield numbers and failure rates in the memory module industry for benchmarking purposes. Any information provided would be greatly appreciated
Electronics Forum | Sun Nov 14 17:17:26 EST 2004 | donb
Also try deleting all unused programs from the machine's memory. Sounds stupid, but we have a CP-3 that likes to misalign components if it has more than 6 or 7 programs stored in memory.
Electronics Forum | Tue Feb 21 01:41:07 EST 2012 | kiss
If memory serves correct, your part name or part Id must be actual part numbers. You cannot use the device comments for part numbers in F4G. If memory serves correct.
Electronics Forum | Mon Sep 30 15:26:48 EDT 2013 | leemeyer
I have been using Quad 4C's for 15 years and have never come across this error. Everything initializes OK but when I start a program through Central Controller I get an "OUT OF MEMORY" error. I have flushed the Mod codes and re-entered them and have
