Electronics Forum | Wed Nov 09 23:02:34 EST 2011 | jeffr
Tom, I cannot find the software to operate my Sunshine EPROM burner right now. It is safe for you to read out the files on each of the ROMs using your burner. It is just a plug in, plug out operation to get the machine going again. The machine will s
Electronics Forum | Fri Mar 26 06:58:06 EDT 2010 | ristikas
Hello, We have here very oftenly one error in our MPM Accuflex. I dont know who to ask about that errors... The error is „The transfer light peam interlock has been broken. Remove the obstacle from the path of the beam.“ I checked the sensors and
Electronics Forum | Fri May 22 16:35:21 EDT 2020 | gabriel1blue
Thank you! I think the rotary counter motor went out or the belt broke? The left side is moving fine the right doesn't move at all. If I push the right side very close to origin point some times the machine will complete the process. I'll check that
Electronics Forum | Tue Mar 30 05:27:06 EDT 2010 | accuspares
Hi, Can you tell me at what point in the print cycle the error happens and if it consistently happens at the same point? The machine has two crash beams running down either side of the machine as a safety measure to ensure the table is down before
Electronics Forum | Wed Apr 21 14:32:52 EDT 2010 | remullis
These ovens maintain good profiling as long as you stay on top of maintenance. I had 4 150's and 1 125. The biggest headache is keep the plenums cleaned (very messy). Also the blower motors have been replaced a few times on them as well. If I were yo
Electronics Forum | Thu Jun 01 07:40:23 EDT 2006 | netellink
I have a Suzuki vision machine with 4 heads (SMT-1000VL). This machine is using the camera to inspect the nozzels (4 sets) in the nozzel tray changer every time it is going to change the nozzel(s) in the 4 heads. The problem I have is now the machine
Electronics Forum | Wed Mar 31 04:43:52 EDT 2010 | accuspares
If you dissconnect the crash beam sensor one at a time at the front leaving the remaining one connected you’ll be able to identify what side is causing the problem. Then you will be able to hopefully remove the object or adjust the position of the be
Electronics Forum | Mon Nov 12 17:12:40 EST 2001 | slthomas
Thanks, Dave. Three courtesy cheers for specifications written to reflect the capabilities of the part suppliers, even if they fail to meet the purchaser's (not unreasonable) process req'ts. In the meantime, I'm sure my stencil guy would be more
Electronics Forum | Thu May 26 16:55:51 EDT 2011 | jlawson
If you having bad rotations as main issue this should be fixed at SMT programming side before needing inspection. There are software tools that can eliminate this issue and first article inspection related to rotation errors can be eliminated. ie sti
Electronics Forum | Thu May 21 19:42:51 EDT 2020 | gabriel1blue
My machine does have option F7 to enter the password. I tried to enter the password on different screens but no luck as of now. And not it gave me a deviation counter overflow error? I believe it has to do with the machine data we entered on the mach
