Electronics Forum | Thu Jan 20 17:14:39 EST 2005 | jbrower
Today, I have just finished evaluating Kester's EM907 (SAC305)lead free solder paste and found that for our applications it performs as expected. End result that I am encouraged with the results that we got. The equipment that I used: An SMT2020 to
Electronics Forum | Tue Feb 20 20:07:33 EST 2007 | mdang
My machine TP9-2U have the same problem. I use the camera to walk through the program and it is off and not repeatable. I think the machine has backlash but I don't know how to tighten it up. Can you help??? Thanks, -Michael
Electronics Forum | Tue Feb 27 21:20:23 EST 2007 | mdang
This is the TP9-2U machine and have about 2000 hours on it. When I used the camera to walk through the program, it is not repeatable.
Electronics Forum | Tue Jul 17 12:57:41 EDT 2007 | cyber_wolf
Is your machine a TP9 2U ? If you have a UFP or a MY series machine this condition usually points towards a bad X-wagon motor.
Electronics Forum | Tue Sep 08 13:33:07 EDT 1998 | Brad Kendall
For pick and place, I have worked with the Zevatech machines and Philips machines. Both are great machines. The Zevatech will give you greater speed and still offer great accuracy and repeatability. Don't let the belt drive stuff scare you, it sta
Electronics Forum | Wed Jul 05 01:22:29 EDT 2006 | grantp
Hi, When I started out and we were the same we got an old MYDATA TP9-2U. It places everything, and you should be able to get a cheap one second hand, that will perform very well. They have vision as well, as an options, and that works very well. I w
Electronics Forum | Mon Jul 31 10:08:21 EDT 2006 | pms
My opinion................ If you want to stay with MyData, scrap the old TP9 (many things have changed with MyData machines since 1987, OS, software, hardware, etc), get a rebuilt one from MyData (they will NOT take your old one for credit), comes
Electronics Forum | Tue Aug 01 16:21:32 EDT 2006 | tonaxel
Hallo Paul, ...I was too fast with my writing and haven�t check it before posting. The machine is from 97�. I already contacted the local Mydata dealer here in Germany. They will send an engineer for checking the machine and let me know what I nee
Electronics Forum | Wed Dec 14 12:48:21 EST 2005 | grantp
Hi, A second hand TP9-2U MYDATA could be picked up very low cost, however it will only load a single component at a time, which could be ok for your jobs. However if your running 0402, I am not sure if that model will do it accurately. Your machin
Electronics Forum | Wed Feb 28 07:30:26 EST 2007 | cyber_wolf
We recently scrapped our TP9-2U because of an issue similar to this. The X-axis would overshoot the pick and place positions. This particular machine(2U)only has 1 X motor. The UFP's and the MY machines have a small fine positioning motor that is on