Electronics Forum | Thu Mar 28 19:36:21 EDT 2024 | linux
ensure the nozzle is inserting fulling into the nozzle holder. ensure shaft is lubricated, clean between the magnetics on the shaft. complete nozzle height calibration
Electronics Forum | Mon May 16 12:39:48 EDT 2005 | JB
Agreed with the previous posts: *Make sure there is one empty nozzle changer per head. *Make sure there are no components on the nozzle changers that prvent the nozzle from seating flush with the changer. *make sure all nozzles are fully seated. *Ch
Electronics Forum | Tue Nov 01 18:00:07 EST 2005 | PWH
The front nozzle plate arm had a build-up of grease and material on the roller plate that is closest to the linear bearing. This material caused the nozzle plate to be lower than normal; therefore it was not able to push the nozzle all the way to th
Electronics Forum | Wed Nov 14 16:03:08 EST 2018 | cbeneat
Wondering if anyone will have an idea on what we are experiencing with our Panasonic. When the machine goes to change nozzles,it errors out saying "Nozzle exist error(Rack) occurred,(R side)" There is nothing in the nozzle bank, actually replaced ban
Electronics Forum | Wed Dec 07 18:16:27 EST 2022 | skolev
Hi everyone. I have little problem finding the right SMT nozzle for my new custom machine . For manipulating custom component with dimensions close to passive element 0402 . Now in machine i've put a siemens SMT Nozzle . But there are some problems
Electronics Forum | Wed Jan 19 11:42:24 EST 2000 | Dave F
Greg: Not all nozzles are created equal, not all after market nozzle suppliers are created equal, but it's probably worth a shot. We tried it, we didn't like it, ... but you know some nozzles are really simple things and other nozzles are really co
Electronics Forum | Sun Jan 23 09:24:11 EST 2000 | M Cox
I have had good luck buying after market nozzles from SMT research. Fuji CP3 Nozzles, I bought the Heavy-duty version and they lasted 3 times longer than OEM Nozzles. SMT Research buy's their Panasonic nozzles from the same source as Panasonic does
Electronics Forum | Fri May 13 18:10:35 EDT 2005 | pde
Make sure all plugs and nozzles occupy the nozzle banks. There should be only one empty position. Make sure all nozzles are fully seated and the machine has the correct location for all of the nozzles. An indication may be the machine is trying to pl
Electronics Forum | Tue Jul 05 10:27:34 EDT 2005 | GEB
The nozzles are brand new too (got them friday). 08MPF (0.08") is their part number. I tried using the air kiss feature in the setup mode and found that it blew the nozzle off the nozzle holder, not sure if this is ment to happen in this mode, but t
Electronics Forum | Tue Nov 08 20:20:32 EST 2005 | davef
Necessary tools are: * Chisel * Ball peen hammer After you buy two new nozzles, keep one in a baby food jar filled with your underfill suppliers recommended solvent for half the shift. At the break, swap the dirty nozzle on the machine with the cle