Electronics Forum | Mon Apr 12 13:27:40 EDT 2021 | robl
You didn't pick an easy one to start with did you, the Sapphire is a particular beast that can either amaze or send users to the depths of dispair. If you are in Europe DM me & I'll send you some helpful contacts.
Electronics Forum | Fri Nov 17 09:29:27 EST 2000 | CAL
Some more information is needed. Is there a machine error indicating a mispick? Or a vision error Component missing? I am not as familiar with UIC machines as I am with Siemens but here is my $.02 anyway. Try shimming the feeder under the pick up pos
Electronics Forum | Wed Aug 22 14:39:02 EDT 2012 | wendynguyen234
Our S-2000 pick & place machine has head 2 not picking up any nozzle & displays error code 8342(nozzle check error). In ANC setting, head 1 pick/put ok but not head 2; when "MANUAL" box is checked, clicking PICK/PUT then both head 1 & 2's status disp
Electronics Forum | Thu May 24 08:40:18 EDT 2001 | toolman
hi kris well 0.02 cents south african money is a lot less. but anyway we have a customer with 3 lines all lines are the same equipment and we have had major problems with 0402s .on some manf reels .as a test we moved one reel around and the problem m
Electronics Forum | Mon May 07 09:59:38 EDT 2007 | burrolaj
I have a L20 pick & place and i was wondering if there is a certain way I have to set-up the feeders.If there is..how do I do it.
Electronics Forum | Fri Nov 17 00:27:30 EST 2000 | DL
Kris, I gather from your description that the component can not be picked consistently. Meaning that the machine can place the component. How does the component place? Is the placement text book? Take a good look to see if the component isn't being
Electronics Forum | Sun Feb 13 16:28:00 EST 2011 | tpappano
Does nozzle #1 lower at all when it should pick up a part or is it just staying in the fully up position? If it does come down, but not quite far enough to contact the part, there are adjusting nuts on top of the head that set the lower limit for no
Electronics Forum | Fri Jan 11 00:12:57 EST 2002 | caldon
Pick a niche i.e. Fiber cable splice or BGA replacement service. There are tons on EMS providers and with very cut throat prices. I gaurentee you if you had a BGA rework station and an xray - and offered services in this area you will make a killing
Electronics Forum | Tue Jun 09 04:49:12 EDT 2015 | vinitverma
Is the machine not picking up nozzle from the nozzle changer or is the head 7 not picking up any components? Or is the mis-pick rate too high?
Electronics Forum | Sat Feb 12 18:35:56 EST 2011 | gabriel1blue
Thank you, that works perfect!! Now I was able to set up the offset's and program the machine, but now head #1 will move to the feeder location but it will not move down to pick up the part, then it moves to the drop area, but its only happening on h
