Electronics Forum | Fri Sep 22 04:02:18 EDT 2017 | directx995
So, for Pick and Place machies, will I see any improvements on placement or anything else using CAD instead of plain Pick and Place? Don't know does it metter but I'm using Universal Instruments machines.
Electronics Forum | Tue Jan 23 07:42:25 EST 2018 | robl
Hi James, Thank you for answering. We can simultaneously pick multiple different part numbers with no problem, but we cannot generate programs simultaneously picking the same part number from multiple feeders on our Juki's. We can on our Yamaha's.
Electronics Forum | Mon Apr 09 13:16:57 EDT 2018 | harlymh
Would you recommend a Yamaha Pick and place? In terms of reliability, accuracy, cph? We're looking for a pick and place that can deliver a 50 micron accuracy. What brands do you recommend for high accuracy placements?
Electronics Forum | Fri Jun 12 18:21:52 EDT 2020 | proceng1
I've had components move in the pocket and cause mis-picks. Generally, the part moves, but settles in the pocket after a moment. So I slowed down the pick up speed. It gave the part in the feeder a chance to settle before picking.
Electronics Forum | Tue Feb 16 16:32:58 EST 2021 | rl
Same as above, probably going to be 100nf 0603 or 0402 Caps, or 0805 if old technology. If you have a decent pick & place you can gang pick these - line up 8 reels in a row of the same value for example & cut pick times, and reel changes
Electronics Forum | Tue Aug 12 14:49:26 EDT 2008 | awegener
I'm attempting to pick and place a small rivet onto our PCB. The rivet should be attached via reflow solder. The rivet will be used to create a sandwich, holding together a frame and additional circuit board in a package. This part is intended onl
Electronics Forum | Wed Jun 17 10:02:38 EDT 2015 | rgduval
Having some issues with our GSM picking parts that are delivered by the PTF off center; and wondering if there's a relatively painless way to calibrate where the head goes to pick the part on the belt. Near as I can see, the PTF is picking the parts
Electronics Forum | Wed Aug 12 14:35:33 EDT 2015 | ehess
having a problem with several heads miss picking 8mm feeder parts. Had to bypass 2 of the heads because it was becoming such a hardship. Heads 3, 4 (bypassed), and 8 (bypassed). On 3 and 8, it will miss so many it errors, and when I clear the erro
Electronics Forum | Thu Feb 13 03:30:28 EST 2020 | tamasmagyar
Hi Nizar, Pick and Place nozzle, pick-up speed, component symmetry if it has to be rotated while picked up are just some things I would look at. See also if the trays you pick connectors up from, are programmed correctly to the machine. You can al
Electronics Forum | Wed Jun 10 00:34:40 EDT 2015 | vinitverma
I understand from your post that the head does go to the nozzle changer intending to change the nozzle but sometimes it entirely fails to pick up the nozzle and sometimes the nozzle gets picked up a bit but gets stuck in the nozzle changer. This mos
