Electronics Forum | Thu Mar 02 04:50:25 EST 2006 | bobpan
oh....for the feeders moving 2 parts....you must teach a pickup repeat. Make an extent in the pickup editor and attach it to repeat with pick and make it a 2x1 with an 80 mil offset. The machine will then pick the part that is out of the sensor first
Electronics Forum | Thu Jan 18 14:03:09 EST 2007 | pima
Hello everybody!! I would like to know what kind of tool do you use to analize pick-up error rate at CP and IP fuji machines? Is it special kind of software or you use some customized solutions? Im thinking about writing some kind of database based
Electronics Forum | Wed Apr 08 04:29:14 EDT 2009 | kircchoffs
Hi Rodrigo, is your problem occurs only at 2nd device table? how about if you transfer the feeders to the 1st device table? if it happens at both device pls your part data if there's a value at pick-up. you can also check the proper data of the de
Electronics Forum | Thu Sep 02 04:59:17 EDT 2010 | sachu_70
Feeder calibration helps to center the window opening used during component pick-up by a machine nozzle. Once this is established, the next step would be to confirm the centering of Machine nozzle to the center of this feeder window during machine op
Electronics Forum | Thu Aug 16 04:35:10 EDT 2012 | craigweir
Can anyone advise on the risks involved in using a (previously soldered) component, in this case an 'SOIC8', as pick-up area for subsequent pick/place operation of sub-assy to larger motherboard ? The sub-assy in question would be a small outline(25
Electronics Forum | Thu Sep 08 13:07:18 EDT 2016 | claudea2
Hello Bob, we changed the nozzle z parameter until we got limit errors and backed up 1 mil. There was a slight reduction in the limit errors on the pickup of the component but it is still a problem. With the mod code we adjust the soft z height to ab
Electronics Forum | Wed May 02 13:02:14 EDT 2018 | emeto
Based on the pickup surface area: 1. Use the biggest nozzle possible, 2.Keep in mind that some nozzles have bigger inside diameter hole(more vacuum) 3. Keep in mind that some pickup surfaces are rigid(not really flat surface) - use rubber tip nozzles
Electronics Forum | Thu Oct 08 20:59:59 EDT 2020 | sosigguy
hello, have you solved this issue yet? can you not use the teaching function for a part to set the pickup position? I believe we have worked around by changing the property of one of the feeder types(i think we used Stick-B) under the machine proper
Electronics Forum | Wed Dec 23 22:00:50 EST 1998 | Phillip Hunter
| Many machines now have adaptive pick that helps tune in the pickup as the 0402 part moves around in the pocket. Fuji may have a feature like this, but I think they adapt the pickup in only one axis (by adjusting the feeder rack). Unfortunately th
Electronics Forum | Wed Jul 14 17:33:04 EDT 2004 | Ross Clunie
The short answer is "No" the white and green feeders are not interchangble. The green feeder has a channel in it to allow the "embosed" or plastic tape to fit flat at the pickup position. If you use paper tape in this type of feeder the tape can be d