Electronics Forum | Tue Dec 17 17:47:49 EST 2002 | Tim Marc
Dave, I�m talking about the 75% vertical fill of solder IPC 6.3 criteria (B), and 6.3.1 Fig 6-5. I also referred to the annular ring of the Plated-Through-Hole, being coated with solder mask. Semantics, yes I did refer to the Plated-Through-Hole (Sup
Electronics Forum | Mon Mar 19 22:09:38 EDT 2012 | davef
J-STD-003B prescribes test methods, defect definitions and illustrations for assessing the solderability of printed board surface conductors, attachment lands, and plated-through holes utilizing either tin/lead or lead-free solders. This standard is
Electronics Forum | Mon Aug 28 10:26:56 EDT 2000 | Travis Slaughter
Being its sudden and only 1 product I would suspect the PCB particularly the barrels in the plated through holes being contaminated.
Electronics Forum | Wed Jul 20 17:23:19 EDT 2005 | davef
IPC-2222 - Sectional Design Standard For Printed Board For Organic Printed Boards, Table 9-3 � Plated Through Hole Diameter To Lead Diameter Relationships will give you the standard information you require.
Electronics Forum | Tue Jun 04 13:13:58 EDT 2002 | slthomas
Another thing we see is solder balls (sometimes fines, sometimes larger stuff) in the vias after a misprint has been poorly cleaned, as in wiped down but not washed. They end up in the plated through holes too, but those get nicely cleaned up in the
Electronics Forum | Wed Mar 24 07:10:32 EDT 2010 | aj
Hi all, I would like some recommendations on what machines are best suited to Automated Insertion of plated through hole LEDs. I am sure there are plenty of pitfalls associated with this type of process aswell, so if you could share these aswell.
Electronics Forum | Tue Feb 28 20:56:12 EST 2006 | davef
Here you go ... PCB FR-4 Inspection Manual 1 Introduction This defines the minimum acceptability requirements. It is not intended for use as a performance specification for the Company or procurement. It is based on the requirements of Acceptabi
Electronics Forum | Thu Apr 27 04:41:48 EDT 2000 | Scott Davies
Our R&D people are looking at the possibility of "Silver Through Hole" as an alternative to "Plated Through Hole" for our future PCB specification. Do any of you have any experience of this, advantages/disadvantages, etc. I'm told that the main reaso
Electronics Forum | Wed Nov 07 20:01:35 EST 2007 | davef
Josh: Hole size to lead diameter ratio is meaningless. Minimum and maximum component lead to finished hole size clearance do not vary according to component lead diameter or hole size. Regardless, here's what you want to smack those goofballs over i
Electronics Forum | Tue Dec 17 16:27:02 EST 2002 | davef
I�m not clear on the problem. What I get: * Your fabricator did not deliver the product that you asked for in your purchase order. * Pad. Land. A portion of a conductive pattern used as a termination area. Metal surrounding a hole on a printed ci