Electronics Forum | Mon Apr 18 12:05:22 EDT 2022 | proceng1
Is it the CREE with the soft dome? We had to get specially made nozzles for our SAMSUNG machines to pick up cree LEDs correctly. They are basically rubber tipped. We bought from Count on Tools website.
Electronics Forum | Fri Feb 01 07:21:32 EST 2019 | dfl
One of my 8mm feeders is blinking the red led after the pick-up. With both buttons the motor works as expected (forward/backward), but after the nozzle pick-up the motor moves forward and then the red led blinks. pressing the buttons the green led l
Electronics Forum | Thu Jan 13 15:58:50 EST 2005 | clarkk
Vikt, I'm using the LED type (leaded form). The LED is domed, but the dome is on the bottom. The surface that the nozzle picks up on is flat, and the nozzle does not extend beyond the edge of the body. The problem is in the inspection, which is rejec
Electronics Forum | Thu Mar 14 07:22:22 EDT 2013 | fredcalkins
This problem has become a real issue with the tacky silicon used in many LEDs. Cree has recomended that the pull off angle be changed for the cover film as mentioned by the previous commentor. With these new silicon LEDs they are recomending teflon o
Electronics Forum | Tue Nov 25 08:36:32 EST 2014 | bobpan
Tep stands for the transport card. The board is located in the front bottom left of the machine and should be by itself and have green and red leds lit on the top of it. I would try to reseat the card and then try to reboot the machine. If the proble
Electronics Forum | Thu Jul 25 14:18:34 EDT 2019 | babe7362000
It's been awhile but I was wondering if anyone knows how to read the LED's on the Tep board to what they mean. Top 4 Red 1. blinking red 2. lit red 3. off 4. lit red 5. lit red 1. blinking green 2. not lit 3. lit green 4. off 5. off On the Gui
Electronics Forum | Tue Aug 01 16:29:01 EDT 2017 | tey422
Try the method I mentioned earlier, it greatly improves most of the picked-but-drops issues. We never need to use any custom make nozzles, even for the trapezoid dome shaped LED we were having the issue with. Use smaller round diameter nozzle would
Electronics Forum | Wed Nov 14 16:03:08 EST 2018 | cbeneat
Wondering if anyone will have an idea on what we are experiencing with our Panasonic. When the machine goes to change nozzles,it errors out saying "Nozzle exist error(Rack) occurred,(R side)" There is nothing in the nozzle bank, actually replaced ban
Electronics Forum | Fri Feb 27 17:37:07 EST 2004 | JT
We use a JUKI 760 and a 106 nozzle.
Electronics Forum | Tue Oct 07 14:47:38 EDT 2014 | cbeneat
Try Count on tools, they can probably make what you need.