Electronics Forum | Thu Jan 19 12:16:46 EST 2012 | leemeyer
I read back through your post. It seems that you do not have bases that belong with the 4C machine. I think that you have bases for Q series machines. That would explain why the connectors don't fit. You say that there are blocks on the feeder base.
Electronics Forum | Mon Mar 04 21:26:58 EST 2013 | kevinjamison
Hello, I Just purchased Quad IVC. I have Programmed and Operated extensively 15 years ago, but know a bit rusty. The PC in the Machine has has CC 7.54 and APW, and Win 3.1. I am looking for someone who has copies of these programs on disks to share,
Electronics Forum | Fri May 06 10:18:43 EDT 2011 | bobpan
Hello Doug, There is no tuning up of the cyber-unit. From the symptoms you describe......sounds like the white cable that plugs into the cyber is intermittent. Maybe you can find one somewhere and try that. The cyber unit is a closed assy. and was ma
Electronics Forum | Tue Feb 07 05:35:56 EST 2012 | ngineer
If anyone else reads this because they blew up a feeder like mine, an appropriate capacitor for replacement is : Kemet T491D107K006AT Which you can find at mouser, or probably digi-key or newark. This is for the larger capacitors, i think they're
Electronics Forum | Tue Feb 07 05:36:22 EST 2012 | ngineer
If anyone else reads this because they blew up a feeder like mine, an appropriate capacitor for replacement is : Kemet T491D107K006AT Which you can find at mouser, or probably digi-key or newark. This is for the larger capacitors, i think they're
Electronics Forum | Tue Feb 07 01:54:45 EST 2012 | ngineer
What Should I use to clean a sticking conveyor belts in my pick an place machine (Quad IVc)? The belts seem to have what I would guess to be solder paste that is dried, but also they seem to be a bit gunked up as if they had gotten some oil or greas
Electronics Forum | Sun Sep 30 07:39:00 EDT 2012 | saduquette
Hi bobpan, Just wanted to follow up on my problem. With a bit of reverse engineering, I was able to troubleshhot my board to a faulty trace between the EEPROM and DSP chip. Since it was an 'inner layer' trace I had no choice but to 'green wire' i
Electronics Forum | Tue May 07 13:32:15 EDT 2013 | bobpan
Sounds like you may have a z-axis problem. I would check the axis out and run the z rod up and down by hand to see if there is a problem....sticking,sensor/flag broken....etc. Maybe you can unplug the z-axis card and then turn the machine on to see i
Electronics Forum | Wed Feb 11 09:29:59 EST 2015 | bobpan
A reading of 1 almost always means that there is something on the lens or possibly dust inside the unit blocking the laser and tricking the machine into thinking the nozzle is already down when it starts to step from the home 'up' position. Usually i
Electronics Forum | Fri Feb 01 07:07:01 EST 2019 | dfl
Another semi-related question: are the four motion cards the same? (except for the dips, I guess). I have a spare one, marked as T motion, all dips to up position. Can I use as X or Y, if I match the dips? The boards look like to have the same comp