Electronics Forum | Mon Jan 30 20:48:08 EST 2006 | ____
Send the CCIMF files to Fuji America to review. Need to make sure that the MainMark and SubMark are the same for each machine output program/ref.des. (847) 821-2401
Electronics Forum | Wed Jan 03 18:58:28 EST 2007 | SWAG
oops - forgot "ref. des." is also needed in the CAD upload file but it sounds like you already knew that...
Electronics Forum | Fri Mar 07 12:02:40 EST 2008 | jdumont
http://www.amazon.com/SMT-Step-Step-Collection-2006/dp/1593700873/ref=sr_1_1?ie=UTF8&s=books&qid=1204909337&sr=8-1
Electronics Forum | Tue Mar 17 16:43:26 EDT 2009 | gregf912
AJ, you are making this harder than it realy is. Import the cad file with the BOM. Then use the panalize function built into Flexa to step and repeat for block 2 and 3. The ref. designators will be tied to each block (board).
Electronics Forum | Sat Sep 26 21:45:37 EDT 2009 | casmt
It didn't see the ref points on the bottom of the hydra head. start by checking the camera for dirt or dropped parts. Is it a hydra camera or Linescan?
Electronics Forum | Tue Nov 03 01:11:51 EST 2009 | dilogic
Almost every machine can import plain ASCII files, internal formats vary a lot and usually are in some kind of binary format. My suggestion is to generate plain ASCII file with at minimum 5 fields : X, Y, theta, RefDes and component type. - Deni
Electronics Forum | Wed Sep 05 17:14:39 EDT 2012 | cpitarys
All that is required is the sample surface area. (LxWx2) Ref, IPC-TM-650. 2.3.26.1
Electronics Forum | Thu Sep 21 11:30:29 EDT 2017 | emeto
Pick and Place file is a plain text file that usually contains the placement coordinates together with package type and ref designators. CAD file contains all the information about the assembly - PCB and components/packages both text and graphical re
Electronics Forum | Fri Sep 22 10:37:23 EDT 2017 | emeto
No, it wouldn't affect anything. P&P file will work just fine for that purpose, as it holds all the information you need(Ref. Des, X, Y, Angle, Layer.....).
Electronics Forum | Fri Jan 05 12:02:28 EST 2018 | ilavu
Camera works fine from home to ref. position to fiducial1 and 2. Problem shows up from home to board stop. AC voltage between AC1 and AC2 is 41.7 and during move it drops to 41.5.
