Electronics Forum | Tue Nov 28 15:06:59 EST 2000 | rabell
We have recently moved our "ESD: See it! Believe It! Control It!" product to a network version. This particular course is aimed at engineers and technicians, and these people typically already have a computer on their desktop, so providing the train
Electronics Forum | Thu Jul 20 16:23:08 EDT 2000 | Bob Willis
We set up and ran this process at Nepcon UK with some success but we used a UV adhesive less than 10sec cure so no heat. Push off force for the biggest parts was over 800 grams. We have had to modify the design rules a little to make it work but it
Electronics Forum | Mon Sep 28 09:18:30 EDT 1998 | Ben Wilmot
The majority of SMT resistors use the following notation. 10 X eg 153 represents 1k5 resistor The third digit in the sequence denotes the number of zeros to add after the first two digits giving the value in ohms. Many Caps will follow the same nota
Electronics Forum | Fri Jul 10 14:26:17 EDT 1998 | Bob Willis
There is a FREE yes Free inspection standard on my web site you can download. There is also information on my CD ROM, posters and video for BGA Inspection http://www.bobwillis.co.uk | | I am very interesting of getting information about the criteria
Electronics Forum | Tue Apr 07 05:44:02 EDT 1998 | bob willis
If you want there is a video tape, CD ROM and report on the use of the technology available from my web site www.bobwillis.co.uk | | Hi all, | I would like to have some information regarding the paste in holes process.We are the Backplane manufact
Electronics Forum | Tue Jun 08 07:10:54 EDT 2004 | davef
Not quite what you seek, but as close as you're going to get ... 9850-K - Surface Mount Placement Equipment Characterization - KIT (Hard Copy & CD-ROM) ANSI Approved This standard has been developed to standardize the parameters, measurement proc
Electronics Forum | Thu Mar 29 01:17:50 EDT 2007 | Brian
I actually wrote a program that looked just like the CSM66/84 system. I wrote it so we could train our staff offline without having to interrupt production. It did everything just like the real program (including the initial RAM load.) You would use
Electronics Forum | Fri Jun 01 17:31:17 EDT 2007 | gsala
Thanks Patrick, also IPC-HDBK-001 explains even better then IPC-J-STD-004, but unfortunately not yet infos about flux for L-F soldering.That's why I am trying to get some infos more from experienced people. Some L-F (SAC or SACX) cored wires vendor
Electronics Forum | Fri Mar 20 04:09:57 EDT 2015 | robertwillis
Yes generally speaking yes if there is not contamination on the board from PCB manufacture. for dendrite formation you also need moisture and voltage during operation of the product. You can see many of my IPC Defect of the Month videos at showing yo
Electronics Forum | Wed Nov 02 16:36:05 EDT 2016 | ttheis
Problem was bad FCU board; replaced with FCU from another machine and swapped rom chips. Oven operates properly and communicates with PC. BTU was kind enough to supply the default usernames and passwords for wincon but they did not work. Still waiti
