Electronics Forum | Fri Jun 08 19:04:32 EDT 2007 | flkpm
Hi all. First off thanks in advance for any help or suggestions you may give. What I need help with is making a 4x4 keypad overlay work again. I have the overlay and the PCB, all I need now is a device that connects to the PCB that senses the push of
Electronics Forum | Tue Feb 05 14:35:30 EST 2013 | rway
In order to test a reed switch on the Teradyne, you will need an electro-magnet mounted inside the fixture. It will need to be mounted directly under the reed. First perform the passive testing (TVSV or Cont), then the active test. Drive the coil
Electronics Forum | Tue Feb 05 15:31:58 EST 2013 | davef
As a quick response, look here: http://www.cotorelay.com/images/stories/coto_wp__reliability_ver_003.pdf We receive no benefit from, have no investment in nor know any employees of the company listed above. BR, davef
Electronics Forum | Sat Jun 09 07:59:14 EDT 2007 | davef
A keypad overlay is used to adapt one basic keypad design to a variety of applications. The overlay is positioned on top of the key board to match functions on the overlay with buttons on the keypad. The user selects a function on the by pressing t
Electronics Forum | Thu Jul 24 12:36:54 EDT 2008 | rfematt
We have a new board that requires a membrane switch. The membrane switch is a 1" stainless-steel dome. We were wondering if ENIG plating will hold for an expected life
Electronics Forum | Mon May 25 20:31:32 EDT 2009 | dcell_1t
wich is the model of the machine you're trying to place this component? what are the placement issues that youre observing. on the IP3 that we place switches we use a 3.7 nozzle (standard) because of the dimensions on the component, the issue that I
Electronics Forum | Tue Feb 25 03:32:58 EST 2020 | bukas
hello guys, I got a problem with MAIN START switch on Samsung CP45FV NEO. The switch itself works, and it activates contactors #1-1 #1-2 and #3 but after pressing READY button there is en error msg reporting that MAIN START has not been pressed. Alre
Electronics Forum | Thu Jul 24 14:53:17 EDT 2008 | boardhouse
I would agree with Doug, Enig with this type of switch is doubtful that it will hold up. You may have to think about Electroplated Deep Gold (hard Gold) 30-40 micro inches. Regards, Mike
Electronics Forum | Mon May 25 21:27:07 EDT 2009 | paligora
Our machine is YAMAHA YVL88II and the issues we have with these data switches are either not being picked up from the feeder at all or are being ped before assembly.
Electronics Forum | Thu Jun 12 00:20:41 EDT 2014 | jasmine01
How to limt my Cisco WS-C3560X-48T-S switch port to 128kb which running 12.2(55)SE3 ? Could anyone help with the IOS commands needed to achieve this ?
