Electronics Forum | Fri Feb 23 10:24:24 EST 2001 | johnthor
We still build a legacy product with a primitive backplane using silver plated fork terminals for outside world connections. After some 20 years of no problems the fork terminals on raw stock PCBs were black and almost unsolderable. Because of the
Electronics Forum | Mon Feb 01 16:40:45 EST 1999 | Dave Waddick
I have a product using high temperature solder to connect terminal pins to a PCB. The board is single sided copper, no plaiting. The solder is 95% tin 5 % silver. The flux is low activity rosin. The product is a subassembly. When the product is
Electronics Forum | Thu Jun 13 11:25:40 EDT 2002 | davef
Help us understand your situation by telling us about: * Is this a terminal-to-terminal short on a single MELF? Or is this a terminal-to-terminal short between or than one MELF? * Clearance of 0.8mm is the distance between what features? * Size ME
Electronics Forum | Wed Apr 16 21:00:50 EDT 2003 | yukim
Hi Dave, thanks! The peak temp on the terminal device is about 210C. Some more questions: The soldering part of the terminal is about the same size as the PCB pad. We observe a lot of voids when we remove the terminal device, whice can be removed v
Electronics Forum | Thu Jun 29 06:26:36 EDT 2006 | AR
Hi Slaine, The terminations are still present on the component but all the solder (including the pad finish) has coalesced on to the terminations. The termination that normally is shiny and bright in colour has turned matte grey on that zone where t
Electronics Forum | Mon Feb 18 03:40:04 EST 2008 | akareti
Hi everybody, I found a defect varistor 0603 Tombstone and poor welting when we use component that terminal is Silver palladium (Ag/ Pd) with Leaded solder paste (63/37). Then we change alternative component that terminal is Ni/ Sn the result not fou
Electronics Forum | Wed Jan 03 18:44:13 EST 2001 | Todd Koeppel
If we procure parts with a Sn/Ag termination, can we still use standard Sn/Pb solder pastes and the current reflow and wave processes?
Electronics Forum | Mon Jun 19 11:53:01 EDT 2000 | Chris
I am looking for a vendor who can supply me with Pd/Ag Paladium Silver terminated 0402 capacitors in a wide range of values. Thanks in advance, Chris
Electronics Forum | Mon Jan 17 02:02:38 EST 2000 | PC
Can anyone there please tell me what can cause the SMt chip terminal lifted? This happen quite often and I can't find the rootcause for this problem. Does it cause by material/Placement?? Thanks
Electronics Forum | Wed Jun 05 12:42:37 EDT 2002 | tombr
Hello Everyone! Does anyone know where I can find a spec on the number of wires that can be crimped in a terminal? Would like IPC SPec # Thanks! Tom
