Electronics Forum | Tue Aug 25 14:01:25 EDT 2009 | swag
For what machine?
Electronics Forum | Fri Aug 21 16:15:09 EDT 2009 | drakealvarez
Define "good price". Throw out a number. Good price - One feeder around $2,000.00 & under if possible would help very much. -Aortiz
Electronics Forum | Tue Aug 25 16:35:36 EDT 2009 | drakealvarez
Universal G.S.M. single beam, head A1 (four spindle) -Aortiz
Electronics Forum | Tue Aug 25 18:25:15 EDT 2009 | swag
If you have access to a machine shop you can build your own easily using the same bolt/tooling pin pattern as tracks. Place them on a vibratory track base and disconnect or turn the vibe down.
Electronics Forum | Wed Mar 07 09:29:36 EST 2001 | gsmguru
Enter A value of -1 in the Tray pickup X & Tray pickup Y fields. This will disable the automatic empty tray pickup by the machine. I would recommend getting a data sheet on the tray from the component vendor for accurate pocket & tray dimensions. Var
Electronics Forum | Mon Mar 05 04:25:09 EST 2001 | genglish
Hi, SMTnetters � Does anyone have any information on waffle trays, is there an IPC guideline for the use of these? I am experiencing a universal GSM dumping trays with parts still in the trays and I suspect the tray data will require amending if the
Electronics Forum | Thu Mar 08 16:00:03 EST 2001 | gsmguru
Enter A value of -1 in the Tray pickup X & Tray pickup Y fields. This will disable the automatic empty tray pickup by the machine. I would recommend getting a data sheet on the tray from the component vendor for accurate pocket & tray dimensions. Var
Electronics Forum | Fri Jan 07 17:45:15 EST 2005 | russ
My thoughts on metal trays: One problem with a metal tray relating to ESD is its conductivity. Most trays are conductive but have resistance or a disipative nature. If you were to place a "charged" component into a metal tray that had an uncontrol
Electronics Forum | Tue Nov 15 15:40:52 EST 2011 | jdengler
Do you have any trays in the location you are trying to pick from? The Z axis should move until it detects the top of a tray. Without any trays it may not function correctly. Also some machines will need an empty tray below the tray you want to pi
Electronics Forum | Tue Apr 09 21:57:42 EDT 2019 | alexvolovich
If you were able to do a first/last part, then your tray wagon is set-up. You need to go to Tray Types and program the tray that will match the piece of tape you have. Then you should be able to add your component to the tray wagon.
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411