Electronics Forum | Fri Jul 31 10:02:12 EDT 2009 | spitkis2
Thanks for the info. On the Mydata do you position the cut tape inside a feeder or place it on a tray of some sort? Here the environment is OEM R&D lab so a Mydata would be overkill in terms of size and cost. I was thinking of a smaller auto pick
Electronics Forum | Mon May 13 23:44:26 EDT 2019 | dami0629
if use tray cannot solve the problem, you can change from the design 1）Reduce the effect of temperature on PCB 2) PCB USE HIGH TG 3) BOARD THICKNESS TOO THIN 4) MODIFY THE BOARD SIZE 5) Reduce the V-CUT depth.
Electronics Forum | Thu Oct 08 14:52:56 EDT 1998 | Dick Casagrande
Anyone know about existing standards on components supplied in tubes? Such as SO8s & SO14s should come in Xmm width tube etc. Right now I have 3 separate SO20W type part numbers coming in 3 different size tubes. Would like to be able to tell my suppl
Electronics Forum | Fri Sep 06 10:27:42 EDT 2013 | nophsem
Hi bobpan! MOD CODE 69 is "Waffle Tray Handler Installed Flag" and default setting 0. That's what mode code quick reference table says (the reference table that I've to respect according to the previous owner). And it's different what manual says (M
Electronics Forum | Wed Apr 03 16:07:13 EDT 2013 | microaide
OK, so I think I have figured out the machine configuration for tape feeders. BTW, your procedure for retrieving the X/Y/Z coordinates for the pickup locations was wrong. So I looked it up in the Quad manual. The manual was wrong too. Correct procedu
Electronics Forum | Thu Aug 04 14:44:59 EDT 2005 | Shean Dalton
Hi Sandy B, You certainly can clean the BGA's using an inline or batch process. The correct method to hold them during this process, is the method that provides the desired outcome. I'm familiar with the desired outcome for cleaning singulated BGA
Electronics Forum | Sun Sep 15 15:08:00 EDT 2002 | jersbo
My 2 cents... Screen printing may very well have a leg up on deciding SMT defects... however if you pay attention to your stencil (aperture size ratio etc..) and inspect your prints... I believe its a much lesser number... (paste MFG also plays a ro
Electronics Forum | Thu Mar 01 17:36:31 EST 2018 | spoiltforchoice
I wouldn't touch one of these Chinese machines if a reliable "no headaches" experience is what you are after. I'm sure they do OK for whatever it is they are designed for, but actual volume production not so much. As others have said, proper machines
Electronics Forum | Thu Jul 19 18:15:15 EDT 2012 | jil2000
We have a material that is been stick at cover tape, only 1 supplier is failing and only embossed tape packing is failing. A dark spots between tape and component are observed, we already bake material to se if is humidity, is not. We already apply
Electronics Forum | Thu Feb 05 08:08:46 EST 2004 | stefwitt
To my point of view, you should be aware of some issues. Manual taping machines with a foot switch for tape advancement require quite a few adjustments before you start the job, like: Tape width adjustment, component rail adjustment, pitch setting,
.gif)
