Electronics Forum | Thu Mar 10 23:26:46 EST 2005 | timekey
Of course a new machine out of the box should perform at a realistic Sigma level and it's not unfair to hold a machine manufacturer true to their claims. However, even if a new machine does meet the criteria on day 1, the numbers will be constantly c
Electronics Forum | Mon Feb 05 10:12:32 EST 2007 | slthomas
The use of booties isn't required per se, just considered a standard step necessary to reach the 10,000 target. You also need to vacuum (central vac system, NOT exhausting into the room) daily, mop weekly, have a one piece floor, blah, blah, blah....
Electronics Forum | Mon Jun 19 09:47:23 EDT 2017 | georgetruitt
You have a lot to think about! What does the flux manufacturer recommend as far as specifics like water temp or pressure? Do they recommend high temp di-water a detergent or saponifier? Do you currently have a cleaning machine, batch cleaner or inl
Electronics Forum | Mon Jul 13 13:48:37 EDT 2009 | christian01976
Hello! You can check your vacuum in MANUAL and then VACUUM IN MONITOR. You can switch the vacuum on or off for each head. With a TYPE 72 nozzle and no component the vacuum should be around 80 or 90 and with a component at the nozzle it should be ove
Electronics Forum | Sat Mar 11 08:53:44 EST 2017 | tch
My company is looking for a vacuum that can handle being used to clean up solder splashes on the bottom of our wave solder machines and around the solder pot area in our ERSA Selective Solder Machines. In the past we would use a Shopvac but these don
Electronics Forum | Wed Jul 15 12:40:40 EDT 2009 | thanhnguyen
check your vacuum valve, manually turn it on and off,i have the same problem like that b-4, after replacing the vacuum valve, the problem went away.
Electronics Forum | Wed Jul 15 12:41:15 EDT 2009 | thanhnguyen
check your vacuum valve, manually turn it on and off,i have the same problem like that b-4, after replacing the vacuum valve, the problem went away.
Electronics Forum | Wed Jul 15 12:42:54 EDT 2009 | thanhnguyen
check your vacuum valve, manually turn it on and off,i have the same problem like that b-4, after replacing the vacuum valve, the problem went away.
Electronics Forum | Wed Jul 15 12:43:35 EDT 2009 | thanhnguyen
check your vacuum valve, manually turn it on and off,i have the same problem like that b-4, after replacing the vacuum valve, the problem went away.
Electronics Forum | Wed Jul 15 12:44:11 EDT 2009 | thanhnguyen
The Tant size is 3528-21. I use type 72 nozzle > for it. check your vacuum valve, manually turn it on and off,i have the same problem like that b-4, after replacing the vacuum valve, the problem went away.
