Electronics Forum | Mon Dec 04 22:23:18 EST 2006 | Brad
Hello all, Happy Holidays. I need the names of some companies that will 'LEASE to purchase' electronics assembly tools. Most importantly Microscopes, Soldering Irons, Air Compressors, Vacuum Pumps, Wire Cutters, Thru Hole Lead Forming Tools, Bakin
Electronics Forum | Thu Mar 01 09:09:04 EST 2012 | cbeneat
We bought two of the nozzles from count on tools. The jury is still out. The vacuum thick errors or the lights sticking at this time has dropped, I reduced the air for the vacuum break to a more reasonable level. There is still some work to do on
Electronics Forum | Tue Jul 17 10:09:48 EDT 2012 | cyber_wolf
Phil is on the right track. Try this.... Go into the service program, and bring up the vacuum force indicators. Manually install a spring loaded tool into the Midas head. Once the tool is in the head, press on the tip of the nozzle with your finger.
Electronics Forum | Wed Aug 06 14:52:15 EDT 2003 | cyber_wolf
Checking the vacuum at all stations is a good place to start. A vacuum guage with a piece of hose attached to a CP nozzle is a very handy tool to have. If you notice less vacuum at any one of the stations, you can start by looking @ the spool valves
Electronics Forum | Wed Dec 14 10:19:56 EST 2016 | jaktechie
Hello, I am new to this forum but I have a question. We use an Orbotech Discovery Ultra to inspect our photo-tools. We currently use this lint free paper as a contrast material underneath the phototool since the vacuum bed on the AOI is black and ou
Electronics Forum | Fri Feb 03 10:34:09 EST 2017 | prdmm1
PANASONIC ERJ-12ZYJ203U i am having a lot of problems picking this resistor up. i have purchased a new tool per engineering (NOT the problem). it seems the my9 is picking up then dropping it. then the machine goes to pick another and picks the dropp
Electronics Forum | Wed May 08 10:40:48 EDT 2013 | huske
We have had this problem before, and Phil was pretty close. On the hydra where the vacuum tubes are connected to the tools shafts you should see a red light inside there. this light locates a lazer cut mark on each of the tool shafts, this lets t
Electronics Forum | Sat Feb 06 16:42:18 EST 2021 | sg7914
Respected all; I am currently a student at RIT and working towards my master's in Manufacturing and Mechanical System Integration with a specialization in Electronics Manufacturing. I came across an interesting topic regarding the tooling and fixt
Electronics Forum | Tue Sep 05 16:26:53 EDT 2006 | Bill
Thinking about this auto-mode on Grid-Lok..... Ok, the board is warped, lets say positively, the pins conform to the warped board... what about the effect on top side and squeegee pressure? It will be much higher and could damage stencils, right? Pos
Electronics Forum | Tue Jan 23 22:38:43 EST 2001 | rpereira
I have recently completed a HUGE screen-printing DOE. I used Taguchi methodology and man I got good results! Here is what I learned for what it's worth: (p.s. to the MPM apps guy I sent a copy to Tim Gillis, Lou Fuda, etc...) EFab vs. Laser: EFab
.gif)
