Electronics Forum | Tue Apr 05 03:16:45 EDT 2011 | grahamcooper22
one of my customers with a BTU VIP 70 has the following settings, 100 / 175 / 210 / 250 / 265 with conveyor speed of 18 ins per minute. They get a peak temp of 240~245C and time above liquidus of 220 C is @ 55 secs. Built in thermocouples should give
Electronics Forum | Fri Oct 28 17:50:17 EDT 2016 | ttheis
Found a broken wire in the data line and I thought that was it for sure but was not. Checked continuity of the data cable and it is ok now but still no comm. The embedded controller status window shows "send failures" but no "reply failures." Winco
Electronics Forum | Fri Apr 05 18:31:22 EDT 2019 | ttheis
I would really suggest staying away from novastar on their ovens- we had a really bad experience with two of their ovens being unable to maintain temperature properly. We ended up buying a used BTU VIP70 and it has been working out great. A Heller 18
Electronics Forum | Tue Jan 03 07:47:44 EST 2023 | richardcargill
No electrical schematic sadly - and there is no sign of a connector under the mounting hole, so I'm guessing that it's never had this function. The actual light tower on it looks remarkably similar to a DEK printer one, so there's a chance that the
Electronics Forum | Fri Dec 19 10:30:08 EST 2003 | haviland
Tony--Good morning. We deal in used and refurbed equipment and have a nice Panasonic line available now w/ DEK 265 printer, Pana PFA MV2CXL chip shooter w/ +(130) feeders, Pana MPA3F w/ +(60) feeders, BTU VIP 70 Reflow, several pieces of input and bu
Electronics Forum | Mon Nov 13 13:27:51 EST 2006 | Javier
It really depends on what deliverables BTU can offer and successfully accomplish without the complexity of various reinvention activities. The basis of its� vehicle stability as a total platform should be broken into a framework of goals and objecti
Electronics Forum | Tue Nov 14 19:59:22 EST 2006 | wchang
Heller 1800S Convection Reflow �� 1996 - 97 vintage �� Dimensions: length 150��, width 53", height 63", �� Number of forced convection zones - top 9, bottom 8 �� Cooling zones: 2 �� Conveyor width (m
Electronics Forum | Wed Nov 02 16:36:05 EDT 2016 | ttheis
Problem was bad FCU board; replaced with FCU from another machine and swapped rom chips. Oven operates properly and communicates with PC. BTU was kind enough to supply the default usernames and passwords for wincon but they did not work. Still waiti
Electronics Forum | Mon Jan 09 14:18:51 EST 2017 | ttheis
Thanks for your replies. Customer designed this so we can offer them feedback on the design. Pin manufacturer said most likely too much paste as well. Reducing apeture size would be the easiest solution there. We are running a VIP70 oven with chain r
Electronics Forum | Mon Oct 25 13:06:54 EDT 2021 | richardcargill
Can anyone shed any light on the Speed configuration setting on a BTU VIP70? We're using Winconv2.4a if that matters. There are only 3 editable fields in the configurator, Pulses per unit - Power - Distance. I'm struggling to find out what constitu
