Electronics Forum | Tue Jul 17 17:15:39 EDT 2001 | vance66
On a related note...... I'm wondering if anyone has any experience with 3D inline solder paste inspection systems. I've read about all the features and what they are "supposed" to do. What are the real-world capabilities of these machines?
Electronics Forum | Tue Dec 21 09:22:52 EST 2010 | cwhite30
I have a camalot 1818 dispensing system, but it recently stopped booting up. It gets to the 197 vision initialization screen and then freezes with the message "bad command or file name could not communicate with vp" Does anyone know how to fix this?
Electronics Forum | Thu Jul 12 17:43:50 EDT 2001 | Steve
In order to understand your printing process, you cannot rely soley on 2D inspection. By implementing 3D-true volumetric measurement, a more comprehensive approach to correcting the process variation can be established. True volumetric / 3D inspect
Electronics Forum | Thu Jul 19 09:56:52 EDT 2001 | Damian Holzmann
The obvious difference between 2D and 3D is that an accurate volumetric measurement can only be obtained with a 3D measuring system. Laser line measurement in 2D does not allow accurate volumetric measurement. If you modify the aperture in a stencil
Electronics Forum | Wed Dec 23 22:34:22 EST 2020 | bobpan
Hello Marcelo, When you initialize the system in central controller...does it see mvs? Will a different job that you ran before work or does the same error happen? When do you see this error. You can email me at http://www.precision-repairs.com if y
Electronics Forum | Thu Jul 12 21:57:18 EDT 2001 | mugen
Finally someone with great sense of what needs to be done! and wonderful sense of where we need to go.... If 2D was sufficient, HE would have made this physical world of ours 2D too.... (tongue twister, nay...) I agree fully with this Steve guy, 10
Electronics Forum | Wed Aug 31 17:23:00 EDT 2016 | corepride
Hi everyone, I have a problem with the 630 VME vision system: during startup machine, an error popup appears saying "Did not receive request to load machine model within timeout period. Possible machine error condition exists. Do you want to continu
Electronics Forum | Wed Mar 05 10:10:27 EST 2003 | msivigny
Hello James, That sounds very interesting. I didn't know a system like this was available. What is a vision check machine? Is it a software monitoring tool that is installed on manufacturers equipment to evaluate the conditions you mentioned? I'd lik
Electronics Forum | Wed Mar 05 13:37:20 EST 2003 | msivigny
Hello James, It sounds like the system that's being used to gather this data is an AOI system. I will investigte this more because I'm very curious of the process in which this works. I'll keep an eye out for someone using this setup and may get back
Electronics Forum | Mon Feb 18 09:49:43 EST 2019 | bobpan
This is going from my memory from a long time ago...but in the scp.ini file....there could be digital light control and/or a matrix tray handler setting. I would turn them off if they are on. I believe this has something to do with a system setting.
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723