Electronics Forum | Thu Jan 17 09:55:44 EST 2008 | cyber_wolf
Bill is no longer with SMT Research. The camera cal/replacement on CP6 is better off left to the pros.Unless your techs are VERY familiar with the procedure. Call Greg Frazier @ 704-995-4591 he is with SMT Resource. Greg has done work for us in the
Electronics Forum | Fri Jan 25 21:05:24 EST 2008 | daxman
Hey, It's not so bad, but you'll need nozzle jigs to measure camera angle and resolution and also a good dial indicator. I'm pretty sure that I have the pdf's handy as well. send me an email at meshuga@sasktel.net. I'll be able to send you the info
Electronics Forum | Tue Mar 11 13:12:56 EDT 2008 | swag
Careful when you get them! I ordered some overnight some time ago because I was too disorganized to have spares. An operator set a heavy steel vise base on top of the bag-o-bulbs while I was taking off the camera cover and crushed all the new ones.
Electronics Forum | Mon Mar 17 13:34:05 EDT 2008 | cyber_wolf
I have never heard of this being done. The limitation is the camera. Also, I am not aware of anyone making CP4 nozzles for 0201's. If you want a Fuji that will do 0201's get a CP642 and upgrade the camera, or buy a CP643.(643's are set up for 0201's
Electronics Forum | Wed Aug 27 11:09:55 EDT 2008 | fede
I�m interested in the F1 model, due to the possibility of this system to be configured with 1 top camera and 4 side. We are manufacturing 0402 and 0.4mm fine pitch Lead Free, and our PCB�s quality is not very good. With just one camera are you able t
Electronics Forum | Fri Dec 05 14:45:39 EST 2008 | wrongway
I have an 1 year old advantis with flexjet 3 head I tried using the on the head cameras with little luck using the upward looking cameras and putting the part defanition as a QFP using gull-wing leads mesuring the part as is seem to work best thats w
Electronics Forum | Mon Jun 07 15:54:56 EDT 2010 | thanh
ECLIPSE-II After calibration, now i'm having an issue that placement between lazer and camera off about .5mm on the Y mount. if parts go to camera, the placement are good. but parts that placing with lazer it off about .5mm at Y for all rotation. do
Electronics Forum | Fri Jan 22 14:41:19 EST 2010 | babe7362000
Can anyone help me with an AVX 500? Everything on the Machine works except for the camera. I get a light but no vision ( cant see fids or board). I traced the wires all the way from the Vision board into the computer to the top of the box where th
Electronics Forum | Thu Sep 02 10:42:16 EDT 2010 | eezday
I spoke to a field service rep from Universal and he also suggested cycling the power on the machine. Unfortunately this didn't help me but I see a trend. I'm still open to any suggestion. I'm wondering, should I see a bright white light when the
Electronics Forum | Mon Mar 28 17:25:32 EDT 2011 | smellew
revola, Yes you can as long as you have a type 4 or 7 line scan camera fitted(type 7 is best as improved lighting), Front or Rear loading is not important, Snr tech is right, lighting isn't great with this machine but the camera is the same as fitted