Electronics Forum | Wed May 20 07:51:42 EDT 2009 | Jeff
We have a GSM1 with version 1.4. The machine has the old VME chassis. So to upgrade the software (to use enhanced component setup) the VME chassis has to be upgraded. We had UIC in last year to look at this and they would upgrade the VME and software
Electronics Forum | Wed May 27 14:29:25 EDT 2009 | jax
Universal use to sell a a device, machine mountable, that could place this connector. I am not sure if they still sell it... It has been 3-4 years since I saw it in action. The upgrade would force the boards stops to remain in the Up position while
Electronics Forum | Mon Jun 01 11:38:28 EDT 2009 | operator
So would the proper technique be as follows: 1. Grounded operator picks up PCB from ESD rack and attaches a 1meg(wrist strap cord)shunt to ground to a grounding surface on the pcb. 2. operator sprays conformal coating onto pcb using a spr
Electronics Forum | Tue Jun 09 10:21:30 EDT 2009 | c111
We have had issues for the last 4-5 years with converting our stock from leaded to ROHS components. We are a CM and have customers who want all ROHS and some that are still leaded. The problems we run into are when we intrduce a new ROHS component wh
Electronics Forum | Tue Jul 14 08:09:42 EDT 2009 | fujiphil
Check the following: 1. Cam Motor cooling fan. Check if the fan is running or not. Clean the cooling fan cover. 2. Check the oil coolant control box. Check all the contactors does not trip. 3. Check the circuit protector M1CP8, M1CP9 and M1CP10. One
Electronics Forum | Tue Aug 25 08:46:03 EDT 2009 | doremiking
I've just seen your question because I list this site rarely. It can boot usually from C: hard drive, we have 4 Omron AOIs - brand new (RNS & VT-WIN2),theoretically one computer can boot from different disks, it is set up in the BIOS, there are some
Electronics Forum | Tue Jul 28 01:39:32 EDT 2009 | Sean
Hi All, I have some question about flux residue resulted from non clean process as following: 1) Under what kind of circumstances that flux residue could appear? This residue does not happen during production but did appear after some period of ti
Electronics Forum | Fri Jul 31 09:36:17 EDT 2009 | spitkis2
Does anyone know of fully automatic pick and place machines that can pick up parts either from small pieces of cut tape (i.e. 0402's, 0603's, SOT's) or components loosely arranged on a tray (not ic's that are in matrix trays)? Application is proto
Electronics Forum | Thu Aug 13 10:58:58 EDT 2009 | davef
First piece of advice: build the board as you would any other board. Probably, you will be surprised at the holding force of the solder of the connections of the BGA, because the surface area of the solder is very large compared to the weight of the
Electronics Forum | Sun Aug 23 11:42:01 EDT 2009 | ysutariya
Hi Dave, I haven't tried the Probimer yet, but the Taiyo ink didn't hold up too well. As a PCB fabricator, finding a white soldermask that has good trace coverage and survives 4X solder immersion (HASL) is like the holy grail of white soldermask.