Electronics Forum | Tue Mar 12 05:01:09 EDT 2013 | bobpan
The only thing that makes sense is a problem with the program you are working on. Can you edit another program and will it save? You are seeing the same thing happen when you use the machine as and editor or central controller....this makes no sense
Electronics Forum | Tue Mar 12 09:23:52 EDT 2013 | bobpan
If you edit the sequence on the hht.....to fix your problems...you then have to upload the data to central controller. If you are not doing this....you are overwriting the data on the machine with bad data everytime you download to the machine. The l
Electronics Forum | Tue Mar 12 09:24:47 EDT 2013 | bobpan
If you edit the sequence on the hht.....to fix your problems...you then have to upload the data to central controller. If you are not doing this....you are overwriting the data on the machine with bad data everytime you download to the machine. The l
Electronics Forum | Wed Mar 13 11:03:59 EDT 2013 | marcelorotofrance
Despite this machine is an obsolete dynosaur, almost 1/4 century old, is (was) a reliable work horse. Now is broken. Just after first reset the screen shows an error message "1420 XY INTERLOCK". The message clears with RESET. When I push ORG button
Electronics Forum | Tue Apr 02 13:43:54 EDT 2013 | ericrr
On one of the products uses a QFP (Quad Flat Package)which is not going on straight, maybe 20 pins per 4 sides. sometimes I have to tweak the alignment before the board goes in the oven, this practice can be a bit of a worry if you over tweak it - pa
Electronics Forum | Tue Apr 30 12:20:52 EDT 2013 | deanm
We are using a Zebra S4M (soon to be discontinued) for our larger labels, not for PCBs. For very small labels that would fit well on a PCB, we use a Brady BMP71 which is small, versatile and does not require a PC. If you are running mid to larger vol
Electronics Forum | Thu May 02 10:25:14 EDT 2013 | wahahasteven
we have a Specialty coating system (SCS) precisoncoat spray coating system. we are using an acrylic coating material with about 80cp viscosity. The spraying pressure is around 4-6 psi. The main issue is the finish looking of the board. If we apply hi
Electronics Forum | Mon Jun 10 12:59:12 EDT 2013 | rollon65
Hi. Bobpan. Thanks for the reply. This CE machine does not have the side cover switches like my others do, but the good news is that I have now got the machine to initialize and home etc. I bought the machine "as seen" although I was told it was a
Electronics Forum | Wed Jun 19 07:24:10 EDT 2013 | bobpan
Hello Rollon, There needs to be a contrast between the sticker and board. The manual gives and example of a round red sticker. If you still cant still make this work.....Do the following. Run the machine and after it finds fiducials press stop on the
Electronics Forum | Fri Jun 21 03:11:29 EDT 2013 | rollon65
Hi Bobpan. Thanks for the reply. I had already tried red stickers as suggested in the manual, then blue then silver but none of those worked so white was my last resort. I'm running 3 machines in tandem and they all start at the same time so stopp
