Electronics Forum | Thu Jan 28 21:00:26 EST 2021 | charliedci
I use FCT Recovery. During the last 6 months we've been going thru a 6S mission here so we have scrapped old equipment, shelving, anything with the least little metal in it. We sent them some cardboard (by mistake), they sent that back. Now we do sen
Electronics Forum | Tue May 11 18:59:36 EDT 2021 | rgduval
It's annoying, but, the last time I was faced with a similar issue, we ended up sanding the edge on the PCB after depanelization. I stronly recommend charging for this service. It could be sped up by using a Dremel fixed in a vice, but, I would cau
Electronics Forum | Thu Apr 07 20:42:19 EDT 2022 | stephendo
The boards were just a little larger than a SOT8. IIRC we had a pizza slicer type depanelizer and it wasn't too bad. We just did enough to populate the bare PCBs we had. Where I am now a customer has us put a QFP and a few other parts on a SOW28 f
Electronics Forum | Fri May 12 07:54:28 EDT 2023 | tommy_magyar
I will always stand with routers. Tried them all in the past in different companies, and the router seemed the least risky. With a proper extraction system and good maintenance schedule you will not have to worry too much about dust. To help even mo
Electronics Forum | Sun Dec 03 15:35:44 EST 2000 | Michael Nguyen
Wow. And I thought I was the only one having problem with ceramic capacitors.I too am having problem with cracking ceramic capacitors 1206 package.We changed vendors and still having the same problem. I had to reverify my entire process and I had to
Electronics Forum | Sat Feb 05 05:10:53 EST 2000 | Dean
It would be helpful to have some additional info on your line and process. Lets make some assumptions... Consider: re-tooling costs for your fab supplier. Can your supplier hold the additional tollerences for a larger panel. Can your supplier fab
Electronics Forum | Wed Dec 22 12:21:51 EST 1999 | Dave F
Jake: This'll get you started: 1 Read the archives 2 primary approaches to paneling are; * Moise bites * Singulation * Routing * Scoring * Shearing 3 Major depaneling technologies are: * Singulation (Wand 708.459.2400fax2421, Circuit Technolo
Electronics Forum | Tue Dec 03 10:21:11 EST 2002 | jimlew
I don't think I can post pics in this (if anyone knows otherwise let me know), so I will email them to anyone who's curious. Here's the answers to your questions: Placement Force: 0201s are placed on the Siemens S23s with 1 newton of force. The s
Electronics Forum | Mon Jun 05 14:01:48 EDT 2006 | Brian
I have used, Siemens, Juki, Fuji, Universal, and Assembleon. All of them can do the job, depending on the machine mix selected. I personally prefer MPM screenprinters, after using both DEK and MPM. BTU, Vitronics, Heller, and Ellectrovert all make
Electronics Forum | Fri Jul 09 19:09:52 EDT 2010 | rway
A couple of things: Does the cap break if you try to remove it with hot air? If not, than you are breaking the caps do to mechanical stress. We have had similar issues. I don't think your board is suffering from mechanical stress from depaneling o
Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.
115 Pleasant Street
Millis, USA
Phone: 508 376 2500
