Electronics Forum | Mon Nov 13 14:58:56 EST 2017 | davef
Determine the origin of the solder * Sloppy paste printing technique * Lax stencil underside cleaning practices * Sloppy misprint cleaning practices * Poor part placement practices creating solder balls * Poor material control allowing solder p
Electronics Forum | Tue Jun 26 14:54:10 EDT 2018 | etmpalletguy
Be careful, and make sure you ask for proof that the liner your buying is ESD safe! Also, make sure your customer is aware that the liner is made from silicone, in most military & aerospace, no silicone can touch the PC! If your liners are 18x18 and
Electronics Forum | Thu Jul 26 12:04:16 EDT 2018 | wendymm
RS-274X file contains the complete description of a PCB layer image without requiring any external files. It has all the imaging operators needed for a PCB image. Any aperture shape can be defined as well as positive and negative objects. Maybe that
Electronics Forum | Thu Jul 26 14:47:49 EDT 2018 | tsvetan
RS274D contain just NC info and requires external aperture file, RS274X combine aperture and NC info together. You can download RS274X format specs and learn them, it's easy to make RS274X from RS274D + aperture file (basically you copy the aperture
Electronics Forum | Tue Nov 20 12:38:07 EST 2018 | robl
NXT's are never meant to be used in isolation - I've never seen less than 3 thin modules and 1 fat together. AIMEX III uses the same heads in one chassis if you prefer contained machines. I've had lots of platforms over the years, and worked them
Electronics Forum | Mon Apr 15 12:22:21 EDT 2019 | cyber_wolf
You demonstrate it and record it by the report. The report contains the check off items that you defined in the protocol along with supporting data from the testing you did. This usually involves part numbers,data points, and photos. The report shou
Electronics Forum | Thu Aug 22 16:25:18 EDT 2019 | scotceltic
Yes, unfortunately a lot of datasheets these days do not contain the temperature resistance to determine if it can handle the PIP application. In the past I have always used a 250 C at a min of 5 sec for the material. Also, the part should have sta
Electronics Forum | Fri Aug 02 14:03:34 EDT 2019 | aaronhodge
Thank you for the reply. My concern isn't with each doc having different Revs. I believe the part that I'm struggling the most with is that the product drawings contain no mention of components or a BOM whatsoever. It's as if there is nothing to ti
Electronics Forum | Mon Nov 09 10:19:17 EST 2020 | gregdavill
I've picked up a Yamaha YM66S II machine, On powerup it displays the following: "ERROR CODE-RAM DATA!" "INSERT SYSTEM DISK" The machine looks in good condition, and I'm reasonably confident the RAM error is just a depleted primary battery on the co
Electronics Forum | Tue Mar 02 16:05:46 EST 2021 | travishemen
The document I am using is through Universals Voyager software. It contains all the manuals, part lists, procedures, etc. It is an installed piece of software so it would be hard to share. I was able to find the pdf of this breakdown. I assume th