Electronics Forum | Mon Oct 21 09:22:56 EDT 2013 | sara_pcb
One of our PCB for high reliability application is having 2 BGAs(11X11, ADV 204), The pitch is 1 mm. We decided to wire the BGAs first using re-flow soldering and the rest of the components by hand soldering. Since the PCBs are for high reliability a
Electronics Forum | Thu Jul 25 12:15:56 EDT 2013 | ericrr
I was flicking through the "Element14" (previously known as Farnell) BIG catalog (looking at the pictures) far superior to looking via internet. and found the closest to what you are after a five pin version. "Battery Interconnection System" Header,
Electronics Forum | Fri Aug 16 03:44:12 EDT 2013 | rollon65
Hi. Sorry I don't have an answer for this but I have the same problem in the "Y" axis on one of my 4Cs after the machine has run for around 4 hours. The machine seems to partially correct for the pick-ups being off as the placements are fairly good
Electronics Forum | Thu Jul 25 08:09:37 EDT 2013 | markhoch
I agree with the comments above. I also belive it is a very good idea to have a small conveyor after the screenprinter. It makes it much easier to set-up and/or program the machine. There will be some instances when you transfer a PCB into the screen
Electronics Forum | Mon Aug 26 00:17:32 EDT 2013 | alexeis
Hi, After you got datasheets of component shapes (only new one) and enter it to SMT machine library (including Polarity Mark and Position), you can use our software to simulate and fix all angles. Also, our software has tools to add Polarity informa
Electronics Forum | Tue Aug 13 18:47:07 EDT 2013 | smellew
Just after some information... > > We have a > Universal Combi6241D and I am interested in > knowing if anybody knows of a company or an > engineer that is able to offer maintenance and > breakdown support? > > We are based in the North > Eas
Electronics Forum | Fri Aug 30 22:14:58 EDT 2013 | isd_jwendell
I have used the 850's previous version (and other batch ovens). The current specified was AFTER the unit was at operating temperature, not what it took to warm up. If you have power restrictions, like I do, be careful with this model. Having used ba
Electronics Forum | Thu Sep 05 21:31:36 EDT 2013 | nophsem
Hi: Our machine (QUAD 4C) has a CyberOptics laser 6604033; when initialize at HOME, z-rod descends and doesn't retracts, which makes me think that the laser is misaligned, here's a link to the video recording: http://www.youtube.com/watch?v=W9ma7Zsf
Electronics Forum | Fri Oct 04 16:08:28 EDT 2013 | hegemon
Same idea but simpler execution. Verify Solder pot temperature. Verify Temperature of Solder as it leaves the nozzle. Verify preheating gets your PWB up to 90C-120C prior to soldering. Check machine speed, verify 4 seconds contact with solder at
Electronics Forum | Mon Sep 09 11:18:23 EDT 2013 | shirjer
We have a Vansco system on our 2005 Alpine Coach motor home. We have an intermittent outage problem with the 12V lighter socket. I can plug something in, like the tire sensor monitor, or the GPS, and after I remove it, the outlet no longer works, n