Electronics Forum | Tue Aug 13 16:02:06 EDT 2019 | cbeneat
Splicetronics will send samples of whatever you want to try.
Electronics Forum | Sun Jun 14 13:16:10 EDT 2020 | davef
Where are HIP connections located?
Electronics Forum | Mon Aug 10 13:16:04 EDT 2020 | davef
Try SMTnet Equipment Mart [nav bar on the left margin of this page]
Electronics Forum | Thu Oct 13 16:08:37 EDT 2022 | proy
No we can't change any of the copper, and that I believe is likley the primary cause of the warp
Electronics Forum | Thu Oct 26 15:13:16 EDT 2023 | cyber_wolf
Try 3616 or 3609. Both of these become pliable when heat is applied.
Electronics Forum | Fri Feb 13 16:13:20 EST 2009 | jax
Many shops require levels for typical component packages on FR-4 or a like substrate to be 2, 9, 15, 1 and 10 mg/in2 for fluoride, chloride, bromide, nitrate, and sulfate respectively. These levels can change for Medical or Automotive.
Electronics Forum | Fri Jun 13 16:44:13 EDT 2003 | TechSuppGuy
We only charge for technical support/troubleshooting advice. We will give out part numbers or schedule hourly charged onsite service.
Electronics Forum | Mon Nov 13 16:24:49 EST 2000 | Darby
Depending on the designers pad size, I generally go for 0.010" aperture with 0.010" spacing - stencil thickness 0.005". This combo with metal squeegees and the "usual suspects" of printer set up and placement details should you you hassle free.
Electronics Forum | Tue Jan 23 13:16:09 EST 2001 | CAL
Hoover-Davis makes excellent feeders. You may want to also try http://www.delawaretechnologies.com/prd_smtf.htm The person to speak with is Don Dawson 609-235-8454. Deleware Technologies makes feeders for most placement machines. Cal
