Electronics Forum | Wed Jan 26 08:36:06 EST 2005 | jdengler
Sasha, A standard RS-232 cable with the proper connectors would work. If you want you can make it. Normally the PC will have a DB-9 theses days so the wiring would be PC Machine DB-9 DB-25 2------2 3------3 5------7 Good
Electronics Forum | Tue Dec 06 17:52:06 EST 2005 | jbraime
Hi, Has anybody downloaded programs to their Contact Systems CS-400 machines using serial (RS232) connection? What kind of cable did you use (handshaking, loopback etc)? Which port settings were optimal for download? I'm using the csdown.exe appli
Electronics Forum | Thu Apr 03 13:20:36 EDT 2008 | rway
We currently build a product that uses RS485. ICT is geared very well at testing serial channels, as long as there is a way to synchronize the transmit and receive lines. But in the case of a simply RS232/485 protocol, simply doing a loopback test
Electronics Forum | Thu Jun 21 13:42:05 EDT 2007 | andras
Hi to All, I have bought my CSM66 ~3 years ago. It has a not too user friendly interface... :-( But fortunately it has a great possibility to upload files via RS232. So I have created a simple excel sheet to build those tricky BRD & FDR files. Here
Electronics Forum | Thu Apr 24 21:52:18 EDT 2008 | fowlerchang
We have measured the temperature of CSP solder joint. The peak temperature is 232oC and the wetting time above 217oC is 30s. But we use leaded solder paste instead of lead free solder paste. I doubt why no crack of solder joint was observed after cr
Electronics Forum | Thu Sep 25 09:56:23 EDT 2008 | mysmt
Hello, we are using DEK265gsx printers, at the minute ARCOM unit is not communicating with motor control cards 0,1,2,3 in Y1 enclosure. Checked CPU & RS232/485 cards from other DEK265, found okay. Any help will be appreciated. Mysmt
Electronics Forum | Tue Feb 08 08:49:25 EST 2011 | babe7362000
I was wondering if anyone can tell me why we get a RS232 RECV TIME OUT, HIT A KEYCC. The only way to really get rid of the message is totally shut down the machine. If anyone has had this issue or may know what is wrong, please email me back. It d
Electronics Forum | Wed Jun 19 09:08:30 EDT 2019 | BigFuji642
I'm trying to get a Fuji CP 642 to communicate with Flexa and I am having some difficulties. The machine has a RS232 25pin Data Port on the side of the machine. There is also a RS232 25pin Device Port located under the Data Port. Do both the Data
Electronics Forum | Mon Jun 15 16:51:05 EDT 2020 | emeto
Tin/Lead has 183C melting point and probably around 220 peak temperature at reflow. Tin has 232C melting point. I would assume that based on this information you would understand why intermetallic joint is questionable. Go to any flat finish. HASL wi
Electronics Forum | Thu Sep 03 19:05:05 EDT 2020 | stephendo
Get in touch with this guy. I met him several years ago, he is a great guy and will no doubt help you, one way or another. Mr. Brian D'Amico President Cell: 203-232-9343 E-Mail: b.damico@mirtecusa.com