Electronics Forum | Wed Feb 20 02:12:44 EST 2019 | prasanth
what's the meaning of print pump head in solder paste printing
Electronics Forum | Sun May 05 12:06:22 EDT 2013 | mbb
Hello, I'm looking for a mechanical system for fifo management of solder paste in warehouse in order to eliminate human errors while putting solder paste jars in fridges.
Electronics Forum | Fri Dec 17 08:05:00 EST 2004 | davef
Your solder paste is talking to you, follow its message. Listen to the paste. Be at one with the paste. If you insist on ignoring the message of the paste, add more paste, if you just need to complete the last board or so, but you really should ju
Electronics Forum | Wed Mar 14 19:32:04 EDT 2012 | swag
You're not clear if you intend to reclaim and re-use the paste from the stencil or not. If not, then you should go to cartridges with an air gun or modify a caulking gun for dispensing paste from cartridges. The paste will last a long time.
Electronics Forum | Mon Dec 17 08:34:58 EST 2012 | emeto
I would scrap it. As you said part of it is going to be old paste. All manufacturers don't recommend mixing old with new paste because you change the rheology of the paste.
Electronics Forum | Fri Jan 06 19:57:19 EST 2006 | abhinavajmera
What would be the most suitable expression for ratio of Volume of Alloy to Volume of Paste for a solder paste? For example if we use 63Sn/37Pb alloy with a 90 Wt% metal what would be an appopriate expression for the Volume Ratio?
Electronics Forum | Wed Mar 14 16:10:38 EDT 2012 | cobham1
We need to develop a method of putting solder paste on a stencil then putting the unused part back into the refrig. Reason we are thinking of this method is because we only run circuit boards twice a week. I dont want to waste entire jar of paste bec
Electronics Forum | Wed Jan 30 15:10:09 EST 2013 | hegemon
Restoration of the fluxing properties? Can't see adding a liquid flux to a solder paste (assumed expired shelf life) in order to "restore" anything. If the volatiles in the original paste are gone, then adding more carriers and volatiles will not pr
Electronics Forum | Fri Jan 28 09:05:35 EST 2011 | ldavis
Use tape and reeled solder preforms and place them where ever you need more solder volume.
Electronics Forum | Mon Dec 17 09:38:27 EST 2012 | cyber_wolf
Why scrap paste if there is no degradation of performance? Do your own study to determine this.
