Electronics Forum | Mon Jun 19 12:46:11 EDT 2023 | daniel_stanphill
And I can set deposits down to 34 um on our my500. I do not have the exact numbers in front of me on the my700 or Essemtec, but they will both be better than that.
Electronics Forum | Sat Jul 30 06:02:50 EDT 2022 | sarason
My program PCBSynergy does a conversion between Altium and Juki 700 series , 2000 series and even FX1R, Also yamaha VIOS. It can be found at https://pcbsynergy.com Also lots of other stuff in there for making this job easy sarason
Electronics Forum | Mon Mar 08 09:53:08 EST 1999 | Steve Gregory
> Alignment issues are not so critical on most any system, but thermal >>(top and bottom heater settings) certainly are. Without a serious >>system, I just don't see how it can be done. Thanks again Earl for your valuable communications.. You're
Electronics Forum | Thu Sep 10 18:01:39 EDT 1998 | Earl Moon
| | | | Can anybody point me to a Standard that provides details on the use of Wire Links for the repair of SMT PCBs, e.g. the maximum number of permissible links, the material to be used, the method of joint etc.? | | | Dave: ANSI/IPC-R-700 answers
Electronics Forum | Wed Mar 30 20:06:07 EST 2005 | Sue PH
Ken, I run a Triber and have a manual. This machine was bought used and came to this company before I did. It looks like the manual is a copy and someone wrote Treiber 700B-16F on the front page. I don't know if this is the same machine as yours o
Electronics Forum | Thu Apr 05 09:17:40 EDT 2007 | itaig1
I have seen a method used where the pins on the connector are of the same materials as the thermocouple and the connector is connected via single strand wires of the same material to the PCB however the wires were spot welded to bare copper pads to r
Electronics Forum | Wed Apr 01 10:52:59 EDT 2015 | superlen
Oh, I forgot to add a sample of what my export looks like. Note: that I don't have anything in the VERSION block & I wonder if this might be a problem. [VERSION] [PCB] Unit System = MILIMETER Coordinate = LOWER RIGHT Rotation = 0 Placement Ori
Electronics Forum | Mon Aug 07 18:00:35 EDT 2000 | Keith
Hi, I'm looking for a kit or design for a high temperature measuring device (thermometer). The necessary feature would include: measures air temp. senses up to 700 degrees c audible alarm max temp memeory setting Any help would be greatly appr
Electronics Forum | Fri Feb 05 08:34:51 EST 1999 | Nancy Vandemark
Love the picture. We are considering the PRC 1500. It combines a thermoflo unit with a MBT 250A which we currently use. Does anyone know the difference between the TF200 and the TF700? This is the first I have seen the TF700 mentioned. Also, what
Electronics Forum | Thu Sep 10 08:45:13 EDT 1998 | Dave F
| Can anybody point me to a Standard that provides details on the use of Wire Links for the repair of SMT PCBs, e.g. the maximum number of permissible links, the material to be used, the method of joint etc.? Dave: ANSI/IPC-R-700 answers many of you
