Electronics Forum: backing (Page 5 of 403)

DEK-248

Electronics Forum | Fri Jan 22 11:24:10 EST 2010 | thanh

HAVING A PROBLEM WITH DEK-248 REAR SQUEEGEES AFTER PRINT NOT COMING BACK UP. AFTER SHUT DOWN TO REBOOT, BOTH DROP DOWN,INITIALIZE MACHINE THE FRONT WORK NORMAL, THE REAR SLOWLY MOVING BACK UP, ANY ADVISE. THANKS

MPM Accuflex problems and errors

Electronics Forum | Tue Mar 30 06:27:22 EDT 2010 | ristikas

It happens on the middle of the stecil cleaning. The camera and the cleaner will stay under stencil in half way back. Then machine asking the initate the motors. If to press initate then the pcb stopper will hit the rails. Usually we move camera and

philips Eclipse-II

Electronics Forum | Tue Jun 01 15:06:40 EDT 2010 | thanh

I did. Nothing change. I can go in mount feed back and increase .5mm for all rotations(Lazer mount feed back), then it work. But all my parts go to camera will be off the oposite way.

DEK 265GSX HOOD OPEN ERROR

Electronics Forum | Mon Sep 20 13:55:37 EDT 2010 | jamyboy

Check to make sure that the front and back of the DEK265GSX covers are closed. I have seen issues where the back cover trips its interlock and people go other places to look for the problem.....hope this helps

camalot 1818 vision initialization issue

Electronics Forum | Mon Jan 03 14:38:42 EST 2011 | leemeyer

I had this problem awhile back and it turned out to be a problem with the computer Bios settings. The battery had gone dead and the settings were set back to the default state. Luckily I have 2 of these machines and was able to reset the Bios configu

Back Pressure Effect

Electronics Forum | Thu Jul 07 08:39:39 EDT 2011 | ianjames

How to compensate the back pressure effect that affect the wire of SMT molded package? The wire looks like snake and we call-it snake wire. It only happen near the stitch.

Dross eliminator?

Electronics Forum | Wed May 16 13:38:02 EDT 2012 | wavemasterlarry

Listen, I remeber a thread hear where a potato was used to some how help eliminate dross or help with the ROhS. Its been a while since they had me back on wave, but I am back now.

missing it

Electronics Forum | Sat Jul 13 17:38:20 EDT 2013 | ericrr

um thanks I have just got back into the settings and switched back on, for most of the time I have it switched on but now and again switch it off, just because "what is the difference?" at this stage I will never know.

Mirae 1010 problem

Electronics Forum | Wed Nov 06 15:01:37 EST 2013 | leemeyer

Thanks Bob, Any idea on how to switch between the front & back monitor/keyboard. This machine doesn't have a front/back switch like my other one. i am guessing that there is a keyboard sequence that i need to hit.

topaz x bring back component

Electronics Forum | Fri May 27 13:20:06 EDT 2016 | elton111

how are you. I have a problem with a table that the issue errori topaz. The issue is the message "Bring back component." a problem with the pick up parts vacum setting level is 100 and the current 111 with vacum head is 6. Can u tell me how to Calibr


backing searches for Companies, Equipment, Machines, Suppliers & Information