Electronics Forum | Tue Nov 27 17:47:14 EST 2001 | cparry
I hope this helps. We distribute chairs for BioFit. One type of caster we offer (LRU) is a Dual-wheel soft caster that resists movement when the seat is not occupied. Since all chair manufactures use different legs, if you could provide me with th
Electronics Forum | Mon Jul 04 08:13:54 EDT 2005 | Tom B
Setting Speed for Ram is usually in the BIOS set up, Pressing DEL key, or F1, or ESC should bring you into the screen. It will usualy tell you on boot up. Look in there for the setting. Other times its a jumper setting on the motherboard. 7200 & 1
Electronics Forum | Mon Jan 28 19:59:55 EST 2008 | darby
Sensational -I'm sitting in my little dungeon peeing myself. I've just finished a sort of bio on the British comedian Peter Cook titled "How Very Interesting". He would have been fantastic in this role. But, both of these blokes were very good. Made
Electronics Forum | Sat Oct 29 02:13:27 EDT 2011 | darrenj
Hi, We had a video-related problem and I had to shutdown the machine a few times un-expectedly. Now, the video seems to be fixed (bios config problem), but the machine boots up and says that the serial number is -1 which does not match the calibrati
Electronics Forum | Tue Sep 04 13:23:10 EDT 2012 | jvoytovich
I've got an older (90s?) Contact 3Z system with a bad Falcon vision card. The CPU refuses to even enter the BIOS (or display anything on the monitor) with the card plugged in, but boots normally with it out. I'm looking for any advice on a replaceme
Electronics Forum | Thu Jun 12 11:04:48 EDT 2014 | bobpan
You could have a bad hard drive or the bios settings could be incorrect. We also need to find out what motherboard version you have. Please e-mail me for further help. Go to: www.precision-repairs.com and my e-mail address is on the site. Bob
Electronics Forum | Tue Apr 23 07:08:35 EDT 2019 | robertorocco
Good morning I have a problem with start my Samsung CP40 C machine. After the start Bios win98, and Dpram Initialise, system loading , vision data loading, one icone error visualize: Error Mcp, General error SCP.Exe. Solutions? Thanks
Electronics Forum | Tue Nov 03 20:28:33 EST 2020 | williamrobbins
Yes, it is most likely the BIOS and Windows Time configuration. If you are familiar with how to switch to Windows Operating system mode and back it can be checked. Our displayed times are off but in ASM trace service the times are all accurate so I d
Electronics Forum | Wed Apr 03 09:12:11 EDT 2024 | hta1979
You have to enter the setup utility.Power off the machine,connect AT keyboard to the rear port, power on,press f1, load the bios setup defaults, enter the hdd parameters,in the first menu (Standard CMOS setup) (Cylinder,Head,Sector,Wprecomp) save the
Electronics Forum | Wed Apr 03 22:07:13 EDT 2024 | compit
Not every program can clone a CF card. I did it but I need to check with what kind. You can also simply insert a new CF card into the machine, INSTALL DOS from floppy disks (same version) and then COPY the entire disk EXCEPT the system files (msdos.s
