Electronics Forum | Mon Dec 08 09:10:02 EST 2003 | russ
Dean, thanks again. I am going to but a standard cable and see if it works. If not I will ask for your help. I don't know if this is a 1 or 2 All I can find is "Large" for the model. thanks again Russ
Electronics Forum | Fri Mar 12 15:57:30 EST 2004 | jseagle
Check the cables first, they get damaged after a while by the turntable for the monitor, lots of bending. We had to replace our cables. Also, have you checked the monitor? We had to replace ours. Our 3AV is 8 years old. James
Electronics Forum | Fri Mar 11 14:30:03 EST 2005 | ???
i agree with changing the head board if the ribbon cables have been changed. I would also check the quad align card and make sure the cables are plugged in tight to it and to the backplane. There is a large connector on the backplane that sometimes f
Electronics Forum | Fri Apr 01 07:38:52 EST 2005 | bobpan
The machine has 2 25 pin cables that are supplied with it and you have to have adapters that plug into them for smema or siemens. The cables are x20 and x21 smema pigtails.
Electronics Forum | Sun Sep 18 20:42:37 EDT 2005 | Ken
Link Fail is the RS232 connection to the FCU. I would check the connector, cable that plugs into the computer. Verify all power supplies are working. The most likely scenario is this: Computer malfunction Cable / connector issue. Defecive FCU
Electronics Forum | Tue Oct 11 14:58:52 EDT 2005 | vikkaraja
You do not need to buy any special cable for this purpose. Fuji normally has 2 pins connector attached at the end of each equipment. Now if you do not have those connectors, you can just buy some 2 to 4 conductor cable from your local electronic supp
Electronics Forum | Mon Dec 19 10:18:52 EST 2005 | Jeff
I am interested in finding reliable cable vendors (quality and timely delivery) Anyone have any good/bad experiences? East Coast U.S. preferred.
Electronics Forum | Sun Jan 08 22:55:23 EST 2006 | laerick
I have supplied quality cable assemblies to OEM's for the last 10 years. Give me a call. Larry Erickson Auscon, Inc. www.ausconinc.com 507-438-2068 Cell laerick@smig.net email
Electronics Forum | Sun Jan 08 22:59:58 EST 2006 | laerick
I have supplied quality cable assemblies to OEM's for the last 10 years. Give me a call. Larry Erickson Auscon, Inc. www.ausconinc.com 507-438-2068 Cell laerick@smig.net email
Electronics Forum | Sat Mar 04 11:07:21 EST 2006 | charls
hi pavel, If you are getting vibrate during fast mode, encoder or motor cable might be faulty. yes i faced the same problem in Juki KE2010 m/c. Try by replacing encoder & motor cable from Motor to driver unit. All the best
