Electronics Forum | Wed Feb 23 11:02:41 EST 2000 | John
John, I'll try to take a crack at it. We manufacture our own boards, and have a high mix. We currently have BOTH a Camalot 2800 Dispenser and a DEK 260 Screen printer. We use the camalot for glue applications, and prototype paste. We use the printe
Electronics Forum | Wed Feb 23 11:02:41 EST 2000 | John
John, I'll try to take a crack at it. We manufacture our own boards, and have a high mix. We currently have BOTH a Camalot 2800 Dispenser and a DEK 260 Screen printer. We use the camalot for glue applications, and prototype paste. We use the printe
Electronics Forum | Thu Apr 01 03:04:22 EST 1999 | Scott Davies
Dave, Thanks for the interest. Basically, we looked at this project as a straight swap, i.e. printing the glue on the PCB using a Dek screen printer instead of our current method of dispensing glue using a Camalot dispensing machine. For the PCB we
Electronics Forum | Fri Sep 07 16:37:47 EDT 2012 | burb1999
Ive used the Camalot long time ago to dispense paste on BGA pads after removal then reflow with a machine such as the AirVac. What is the best way to do BGA repair on pads? Ive read alot just reball the bga then put it back on? Todd
Electronics Forum | Wed Nov 08 09:03:42 EST 2006 | pjc
Check out Camalot. They have a new machine, the FX-D that can do both glue and solderpaste dispensing and underfill for the future http://www.speedlinetech.com/camalot/index.aspx
Electronics Forum | Mon Feb 22 23:09:21 EST 1999 | Chris G.
| I'm a 19 Year old singaporean student. | I need to do a report on solder paste dispenser. | i've search the net but to to avail. | Please help if you know anything about solder paste dispenser or have any info and pictures or charts of solder paste
Electronics Forum | Tue Apr 02 11:21:46 EST 2002 | BTaylor
davef I assume this question is for my reply and me. We used a dexter\hysol underfill and a Camalot 5700 to dispense.Single line technique next to a small IC with 14 bumps around the perimeter.The conformal coating was applied with a small brush aro
Electronics Forum | Fri Aug 06 08:45:32 EDT 1999 | Dave F
| Folks, | | Probably not the forum, but forgive me as I am but a dog as described by Justin and admitted by me. However, I am looking for a previously owned Camalot 1818 "goop" dispensing system for selective wave soldering operations. Anyone knowi
Electronics Forum | Tue Jul 19 15:43:37 EDT 2005 | msjohnston1
We are trying to do a dispenser comparison study between the Asymtek Axiom X1020 with DJ9000 valve and the Camalot XyflexPro system. The system will have a dual purpose for dispensing epoxy dots and underfill. I would like to have comments positive
Electronics Forum | Fri Jun 22 12:06:21 EDT 2001 | Pete
The 4713 is an old model, first came out in the late 80's. Recreated as 4713B, C & finally D. Check with UIC on the service issue. It shoots dots at around 18K per hour. Camalot is a far superior machine for liquid dispensing.