Electronics Forum | Wed Aug 09 12:18:06 EDT 2006 | PR
We had to replace the chains on our Omni as well. We used a non-approved oil which build up so much carbon the links would not move. Since using the high temp oil they recommend, no problems.
Electronics Forum | Thu Aug 30 19:39:15 EDT 2007 | davef
Rob If your supplier replaces your carbon bed when the ion beds require replacement [when you call after the light goes red], it will not hurt anything, except increase your costs.
Electronics Forum | Fri Jul 10 08:37:26 EDT 2009 | cyber_wolf
If they are under filled fids, take heavy duty two part epoxy and mix it with carbon powder from your copier. Use a razor blade to carefully trowel it in. We now use laser etched fids. They are much better.
Electronics Forum | Fri Oct 23 17:40:19 EDT 2009 | gregoryyork
So if you have Carbon showing on this would this not mean it is something Organic contaminating the pad.I have seen this before with solder resist depositing over the pad.
Electronics Forum | Tue Oct 27 12:23:44 EDT 2009 | cyber_wolf
One thing a lot of people don't know is that the small X motor on MY machines have carbon brushes in them. If you do not replace the brushes before they wear out it trashes the motor.
Electronics Forum | Tue Jan 25 17:56:14 EST 2011 | austinpeterman
We have a SMT600-CL Aqueous Cleaning System. I am under the impression we are overpaying for the recharging service. Currently, we ship the tanks from Texas to California to have the recharging service performed. Is there a company in the Dallas a
Electronics Forum | Mon Aug 22 23:22:29 EDT 2016 | twhoo
i also notice the carbon and oxygen is high on the defect? Why is that?
Electronics Forum | Mon Jun 10 05:05:33 EDT 2019 | pcbconnectchina
Hello! Don, I heard from SMT factory that the fixture for oven they use is durostone material, I don't if durostone is correct name translated, it is synthetic stone made of carbon fiber sheet. Best Regards Clare PCB Connect China
Electronics Forum | Mon Nov 01 09:56:57 EDT 2021 | richardcargill
Update - Solved On talking with BTU they mentioned that if the conveyor is always running full speed then cleaning out the motor brush area with compressed air will cure it. I'm guessing that the carbon dust had encroached onto the encoder. A good b
Electronics Forum | Fri Jan 04 17:15:54 EST 2002 | Mike Konrad
Eliud, You will most likely not find a local Culligan / US Filter office willing to provide regeneration services. The most cost effective method is to use DI tanks that are user refillable in the field. With user refillable tanks, you need only e
.gif)
