Electronics Forum | Wed Aug 09 16:46:49 EDT 2006 | nitro
We use the Tribol 930/100 Synthetic oil. Also, check the drive motor chain on the output end of the oven. I have seen the set screws back out of the drive gears, and it will kind of pop at times while running.
Electronics Forum | Mon May 24 17:49:58 EDT 2004 | Glenn
I have an alternative way for you guys to clean the chains on your wave solder machine. We currently use Oil Eaters (live bacteria). The bacteria attacks the oil and any other chemical making it easier to clean the chains. The product is environmenta
Electronics Forum | Thu Aug 10 07:04:41 EDT 2006 | CL
Good Morning SWAG, We have had similar problems with our Heller 1800 EXL's when the chains would build up oil and debris. The only way we could get them clean was to put them into a self cleaning oven and carbonize the residues. We then rinsed them
Electronics Forum | Wed Aug 03 11:08:24 EDT 2005 | PWH
We use the following stuff from "Biral USA": BIO30 Synthetic High Temp Oil � Chain Oilers NMG-400G � No melt grease - miter gears/lead screws AS500ML � Anti-size spray - lead screws, drive sprockets, rail support L-brackets It seems to work good
Electronics Forum | Thu Apr 15 01:29:35 EDT 2004 | pyro747
Hello Everyone, I am having a pin chain speed problem. The speed of the chain will slow down after start up of the oven. Example if you set the conveyer to run at 41 in/min, as the oven warms up of conveyer will slow down phycally but won't chan
Electronics Forum | Sun Mar 07 09:24:55 EST 1999 | Scott Cook
| Hi Ya'll... | it's a Soltec Prisma and the conveyer keeps jamming. What it's doing is up at the exit end where the drive motor is, the chain keeps wrapping itself around the drive sprocket and jamming...this is on the backside rail, the frontside
Electronics Forum | Wed Jan 23 08:41:42 EST 2008 | operator
Actually we don't have local fume extraction at our soldering stations. We have 4 going at a time. I was researching last night and found this website. http://www.engineeringtoolbox.com/air-change-rate-room-d_867.html It indicates 10-15 air changes p
Electronics Forum | Wed Aug 09 11:45:25 EDT 2006 | SWAG
We have an OmniFlo 7, 2000 vintage reflow. We are having conveyor problems. I checked the encoder and speed control board and everything is good per tech. manual operations. We removed the chains a couple months ago and thoroughly soaked/cleaned t
Electronics Forum | Wed Aug 03 10:14:59 EDT 2005 | Wonderboy
With oven temps rising due to Lead-Free Processing, I'm looking for some information on high temp Reflow Oven lubricants. I've found some info in the Fine SMTnet Archives on Chain Lubricants, (Mostly Synthetic Motor Oils), but I'm wondering what othe
Electronics Forum | Mon Feb 13 22:09:08 EST 2006 | Baer
Hi all, I will do my best to answer questions on MS2 here. I will try to check back at least every other day. The MS2 does not mix with the solder. It only reacts with the dross. It does not get down into the pumps. It was just formally anounced la
