Electronics Forum | Tue Nov 18 21:11:26 EST 2014 | sonavc
THANK let me change in PD and see the result
Electronics Forum | Thu Jul 30 17:31:41 EDT 2015 | dyoungquist
We are running a Mydata (Micronic) MY15E. The MY100 is the next generation after the MYxxE series. As far as I know, there is no way for the machine itself to check the polarity of ICs to see if 1 or more are in the tube or reel different from all
Electronics Forum | Mon Nov 10 23:14:25 EST 2014 | peteb
Do you have the correct keyboard? Are all of the keys accurate for MCS?
Electronics Forum | Tue Nov 11 13:25:17 EST 2014 | jimmyboz
I do not recall that "TEACH" ever worked. Even if it did, there is no way to save this data to the MCS. After you see that a fiducial cannot be found, change Xa-Ya in the program at the MCS to find it, and of course, re-transmit. Good Luck
Electronics Forum | Wed Nov 19 10:57:55 EST 2014 | jimmyboz
Oh yeah, You can flip to switch on the camera card, VM1710 and jog the PCB under the fiducial camera to visually inspect to placements. switch it back when you are done.
Electronics Forum | Sat Nov 08 21:48:42 EST 2014 | sonavc
ETC then you see TEACH. But I can't see it. Do my machine need to update the software or chane some thing in the Proper program?. I'm using MCS16 computer. So far the machine runs great , But take me awhile to move to correct fiducial location Thank
Electronics Forum | Tue Nov 11 21:21:54 EST 2014 | sonavc
Thank you, that is help, I always change in program and re-transmit. One more question, I program N_data with capacitor is TANTB (using M nozzles in part data). but when I run the program in machine it is always use S nozzles to pick the cap. TANTB