Electronics Forum | Mon Jul 23 17:49:04 EDT 2007 | davef
We know nothing of DeFelsko, but do understand how they distinguish between the solder mask and the conformal coat. DeFelsko manufactures hand-held, non-destructive coating thickness gages that are ideal for measuring the dry film thickness of confo
Electronics Forum | Wed Jun 17 16:54:07 EDT 2009 | jlawson
I am rep for SCS and can state.... Another system provider is SCS (Specialty Coating systems) Precision Coat Systems. Have a stable robust XYZ platform, standalone, inline configuration, Spray + Dispense and can offer Ultrasonic Nozzle Options if re
Electronics Forum | Fri Oct 09 16:07:30 EDT 2009 | dlabelle
We use Dow 2620 silicone conformal coat applied with PVA1000 sprayer machine. If used on a daily bases, we have no problem. If we let the machine sit idle for over a week, we will get bubbles in the conformal coating. Sometimes, purging the line w
Electronics Forum | Thu May 09 10:12:08 EDT 2013 | wahahasteven
this is one of my project. I have tried to remove coating only on those areas with alcohol and thinner, then program the machine to coat the removed area again. But the result obviously shows that two different tones of coating on the board. I also
Electronics Forum | Thu May 09 13:49:24 EDT 2013 | davef
First, it appears that your solder mask and your coating material appear to be incompatible. Second, IPA leaves a residue that's probably not compatible with your coating material, either. IPC-HDBK-830 - Guidelines for Design, Selection and Applic
Electronics Forum | Mon Sep 21 20:45:55 EDT 2009 | davef
10.4. Pre-Cure Examination. Immediately after material application, the uncured conformal coating shall be examined for: a. Bubbles and Air Entrapments. These defects shall be broken by vacuum, with a sharp probe, or other appropriate tools. b. Bridg
Electronics Forum | Fri Jan 05 09:23:10 EST 2001 | Brian Toleno
While there may not be any specific requirement to cleaning prior to coating, cleaning an assembly prior to coating will only serve to increase the reliability and integrity of the coating. Some residues from low-solids fluxes can interact with conf
Electronics Forum | Tue Mar 06 17:14:40 EST 2001 | bschwyn
Is conformal coating necessary for products that are used indoors?
Electronics Forum | Thu Jan 27 08:52:05 EST 2000 | Todd A. Braun
We currently use a silicon conformal coating on many of our manufactured circuit boards and are experiencing situations where the coating doesn't conform. For example, on the sharp edges of components and corners of leads it pulls away before curing
Electronics Forum | Mon Aug 04 15:27:44 EDT 2003 | A
FYI: Nordson lover. Asymtek is a Nordson company. The Nordson SelectCoat is on the Asymtek web site