Electronics Forum | Fri Jan 11 16:26:57 EST 2008 | rschnic
Thanks for the reply. We have software. It just won't connect when the Fuji controller (Flexa) is powered on. It appears that the controller ties up the GEM port. We were wondering if there is something that needs to be reconfigured or shutdown o
Electronics Forum | Tue Dec 23 15:06:25 EST 2008 | evtimov
It depends how manual is the printer. you need to control pressure and speed. If you control both by hand, it is difficult to discuss results. If the pressure is controlled by the printer, than you should be able to do it by one deposit. Also is the
Electronics Forum | Sat Jan 15 16:33:13 EST 2011 | dilogic
Our DEK248 started to behave oddly - squeegee speed can't be controller anymore. It always moves with max.speeed or something close to that, regardless of the current settings. Also, the table sometimes shoots out with very high speed. I am suspectin
Electronics Forum | Fri Aug 24 07:21:51 EDT 2012 | leemeyer
The barbed fitting will work but you will lose all control over the speed of the cylinder. The air control flow valve is essentially the same as the barbed fitting but it allows the user to adjust the volume of air that is supplied to the cylinder wh
Electronics Forum | Thu Jun 06 10:08:55 EDT 2013 | grauen06
We keep all moisture sensitive parts in a humidity control enviroment at our main plant, but our return/refurb products building does not have humidity control. My question: Do moisture sensitive ICs that get hand placed by our refurb/return team n
Electronics Forum | Mon Jul 21 03:48:06 EDT 2014 | edriansyah
Ensure you control the assembly completion. My previous experience, we control the assembly MUST be completed within 72 hrs, since you open the bare PCB seal, until you completed all the soldering process (Reflow & AWS). We manage to control the abo
Electronics Forum | Wed Aug 03 12:18:49 EDT 2016 | dekhead
You don't say what kind of printers you are running, but if you had multiple light sources and independent control of direct an oblique lighting (either manual and software controlled) usually pretty "do-able". I have customer doing almost exclusivel
Electronics Forum | Sun May 26 02:06:39 EDT 2019 | jlawson
Placement force can cause chip cracking-micro cracks also. As machines are getting faster they tend to not control force other than spring pressures and z displacements. There are some machines that have full closed loop place pressure control , but
Electronics Forum | Mon Mar 16 14:08:44 EDT 2020 | sportsradar
Thank you for your reply. So the machine should preform a zero set without the line controller being turned ON? I never tried starting the machine first so I am unfamiliar with this. Thank you again. This community is great. Sincerely, Katrina
Electronics Forum | Fri Aug 07 16:40:31 EDT 2020 | duso02
There is too much variation in the different Conformal Coating types and application requirements that you will get many different answers. Your controls will be tailored to the job requirements. My controls for parylene coating aerospace product is
