Electronics Forum | Tue Jun 19 21:19:58 EDT 2007 | rfrog
I wasn't fond of the help ticket approach to tech support that Aqueous Tech. uses. Our buyer reports a lot of "communication issues" (as they don't seem to be very responsive). I could burn Unit Design until they call in the fire trucks. I'll j
Electronics Forum | Tue Sep 07 22:38:25 EDT 2010 | aqueous
As with so many things, some brands work very well on high density, low profile assemblies and some do not. Because my company manufactures these machines, I don't want to use this forum as an advertisement so I will recommend the following: 1. Sen
Electronics Forum | Wed Sep 12 00:18:19 EDT 2018 | aqueous
Here's a link to an article regarding foam mitigation techniques. It my be helpful. There are many causes of foam. Water alone does not foam. Flux, solubilized in to the water can produce foam. Defluxing additives contain defaming agents which should
Electronics Forum | Tue Aug 31 18:34:32 EDT 2010 | aqueous
If the batch cleaner is truly closed loop, then 100% of all of the process fluid (water) is captured, filtered (particulate, carbon, resin) and reused. This answer is based on a traditional closed-loop batch cleaning system with an integrated water
Electronics Forum | Thu Mar 01 10:46:11 EST 2001 | davef
Various lint free stencil wipe suppliers take various approaches to stencil cleaning. For instance ... Techspray Directions: Start with a dry TechClean Wipe (2358, 2361, or 2362) to remove excess solder pastes. Follow this with the 1608 Pre-Saturat
Electronics Forum | Tue Mar 06 09:18:33 EST 2001 | davef
Two things: 1 Go to IPC and buy "TP-1115 - Selection & Implementation Strategy for A Low-Residue No-Clean Process - Provides direction to electronics manufacturers interested in adopting low residue (LR) assembly technology. It addresses the concern
Electronics Forum | Tue Feb 01 21:48:12 EST 2000 | Dave F
Guo: You want to know: 1 Can I use water as the solvent in an ultrasonic machine to remove solder paste from PCB? Continuing from Jason�s comments: Sure you can use water as the solvent to remove solder paste from PCB, but recognize that some flu
Electronics Forum | Thu Jul 15 19:05:58 EDT 1999 | Earl Moon
| | | We have been encountering diminishing ball shear readings these past few weeks, despite the fact that we did not change any ball shear tester parameter. Our reflow parameters are also within spec limits. ( 210-220 deg C max temp. and 40-60 sec
Electronics Forum | Sat Jan 23 16:07:20 EST 1999 | Steve Gregory
| hi, | i am working towards developing a no-clean process for a customer at contract manufacturing facility. the assemblies have gold fingers on them. these are masked to prevent from any damage to them during reflow soldering. the earlier proces
Electronics Forum | Sun Jan 31 23:03:57 EST 1999 | Dennis O.
| | hi, | | i am working towards developing a no-clean process for a customer at contract manufacturing facility. the assemblies have gold fingers on them. these are masked to prevent from any damage to them during reflow soldering. the earlier pr