Electronics Forum | Fri Jun 09 11:18:25 EDT 2006 | kehoem@bellsouth.net
Question; Do you think it's possible that your customer has got his units mixed up & actually means 0.3 micro inches of gold over 0.5 micro inches of Nickel? That is what I said but their vendor says they are building to print which says 80 uM and i
Electronics Forum | Mon Jan 07 20:37:15 EST 2002 | davef
For soldered areas, we like to keep gold thickness substantially below the maximum you propose. Search the fine SMTnet Archives for our discussions on the topic of acceptable levels of gold with solder connections. Let�s fix this �no one seems be s
Electronics Forum | Wed May 30 17:49:49 EDT 2001 | davef
You are correct. IPC wants you to pay for that standard, regardless if you get a hard copy or download it. Generally, it�s pretty boring stuff for production types. [Although, you will recognize some of the goofy things your designers have done to
Electronics Forum | Thu May 07 21:25:56 EDT 1998 | D.Lange
| I am running a board that is .062" thick and has components that over hang the edge of the board by .090". I have bottom side smt components (chip caps and resistors only) and use the turbulent wave to help solder the components. The problem I am
Electronics Forum | Sat May 09 11:54:12 EDT 1998 | Bob Willis
All the comments that have been made a great but I do have to say that much of the problem comes back to the design engineers not designing for manufacture. Centre board supports would have sorted the problem without jigs. | | I am running a board t
Electronics Forum | Mon Sep 17 15:27:51 EDT 2001 | jschake
Challenges: The basic defects that impact assembly yield are bridging, satellite solder balls, and opens (i.e. tombstones / draw bridges). There are many variables with the stencil printing process that can impact these; several of them are listed
Electronics Forum | Sat Nov 14 08:05:54 EST 1998 | Earl Moon
| | | | I believe that gold fingers on my circuit boards are being | | | | contaminated and need to clean them with some chemical | | | | solution. Any recommendations. | | | | | | | Chuck: What is the type and source of your contamination? Dave
Electronics Forum | Thu Apr 12 22:54:06 EDT 2007 | mika
conductor on the narrowest place ~0.07mm we suggest them to go for a PCB solder pad down to 0.30mm. The Conductor width is: 0.2mm The current problem they are having now is that there will be a problem with 14V to narrow the conductor to the narrowe
Electronics Forum | Wed Aug 20 08:55:59 EDT 2003 | caldon
ADLSMT- I do not know of any standard but do know each town, city, county, and state have different governing rules. Some require a fire suppression system and some insurances require this as well. As far as Supplies go we get most of our stuff from
Electronics Forum | Thu Feb 14 20:24:07 EST 2002 | scott
My first reaction would be to run! FAST! Flex -- well, it... flexes... and isn't flat. While you assemble it, While you transport it, While it goes through the oven... SMT Connectors typically need to be held down during reflow. Fiducial types are
