Electronics Forum | Mon Feb 04 10:38:14 EST 2008 | slthomas
Sure looks like flux residue to me and I don't know how your bare boards could be causing that unless there's something on them when you get them, and that you would notice. I'd still be looking at my own system, blowers and exhaust lines. Do any of
Electronics Forum | Mon Nov 09 07:21:02 EST 2009 | CL
Good Morning, I have seen many posts regarding BGA voiding being excessive and what can be done to better the condition. I have a customer that has an assembly that we have had a diufficult time with. We have spent a lot of time debugging the proces
Electronics Forum | Wed May 25 17:29:58 EDT 2005 | Peter
We are evaluating a low halide Water soldering flux (Aim WS716). Has anyone had good/bad experience with it? Our operator has mentioned strong and irrating smell, even when standing a foot away from the conveyor entry/exit. The fluxer is embedded w
Electronics Forum | Tue Jan 22 20:32:08 EST 2002 | davef
Oooo, thanks for the conversion. Being metrically challenged, az a skratchin ma haid thar fer a mite. We do a G-10 160 thou and have similar issues. Now, we�ve talked about barrel fill [ie, slowing belt speed, increasing pre-heat temps, etc] befor
Electronics Forum | Tue Sep 15 12:27:59 EDT 2015 | sumote
The key to longevity in any automated soldering machine is in the preventative maintenance. If the machine has had regular maintenance preformed on it, your job will be that much easier. The 1st thing I would do is to either throw out the solder t
Electronics Forum | Sun May 20 23:15:34 EDT 2007 | dsd
George, The Radiator is only used on the older Nitrogen ready type Heller Ovens to attract the flux toward the Flux Filtration system. There should be two blowers in the Cooling zone where the radiator is to be fitted and there should be 4" ducting
Electronics Forum | Thu Dec 23 22:31:47 EST 1999 | Vincent Chen
Hi!Charlie, 1.Are you retrofitting your spray fluxer in your wave soldering machine? If you are, please ensure that you have a air knife just before the preheater!Fluxe fumes tends to accumulate and that could be dangerous if your air exhaust is not
Electronics Forum | Tue Mar 20 15:59:27 EST 2001 | CAL
I only inhale flux with a high IPA content.(joke for those who don't know me) I have seen the inside of duct work for our wave soldering machine............NASTY! DAVE F. is right! Flux contains a lot of bad stuff- Chlorides, Bromides, Fluorides,
Electronics Forum | Tue Apr 11 11:47:56 EDT 2006 | amol_kane
Hi SMTnetters, I have a white residue coating all over my reflow oven innards (almost looks like white fungus). How can I absolutely be certain that it’s flux and not anything else?are there any tests available for this? I am planning to check the ov
Electronics Forum | Tue Aug 05 21:18:24 EDT 2003 | cardinal
Hi, One thing you might want to do has to deal with the venting over the top of your spray fluxer. Many times the exhaust comes from the side; instead of directly inline on top of the spray fluxer. This will draw the flux up the thru-hole joints m