Electronics Forum | Tue Jun 20 19:12:41 EDT 2023 | madisreivik
Hello all ! FUJI IP3 starts up, makes zero setting OK But if I start AUTO mode, it gives error -------------------------------------------------------------------------------- Code 11082010 UsedBy MTU3,MTU4,MTU5 Display Usable Proper Data has
Electronics Forum | Tue Jun 20 21:42:19 EDT 2023 | jdengler
The MTU has it's own proper data file. You need to send that to the MTU.
Electronics Forum | Sat Jun 24 13:08:09 EDT 2023 | madisreivik
All is OK now. The machine was offline couple months and probably some memory battery is dead. All problems were solved after uploading prop data to IP and MTU.
Electronics Forum | Wed Jun 21 06:10:36 EDT 2023 | madisreivik
Thanks ! I totally forgot that MTU had its own prop file, uploaded it from Flexa and now works fine.
Electronics Forum | Sun Sep 03 10:05:36 EDT 2017 | unisoft
Hi Unisoft's ProntoGERBER-CONNECTION should help you. ( http://www.unisoft-cim.com/gerber_connection.htm ) -------------- ProntoGERBER-CONNECTION ( http://www.unisoft-cim.com/gerber_connection.htm ) imports raw Gerber data and allows the user to ad
Electronics Forum | Fri Jun 23 21:10:29 EDT 2023 | meher
To resolve this issue, you need to ensure that the proper data is stored and transmitted to the MTU. Double-check the communication settings between the machine and the MTU during the startup process. Make sure that all the necessary data is being se
Electronics Forum | Mon Jan 15 04:54:57 EST 2001 | mattias
Here�s my opinion PanaPro (Panasonic): good balancing/optimization, very easy to setup and use, quick good results, not so good support for third party machines(optimization), Timestamps for balancing/optimization is quite accurate. Cad-conversion?
Electronics Forum | Sat Jan 23 00:20:22 EST 2016 | jlawson
Program conversion bewteen the two can be done , with a custom program. Issue is at what value as most simple conversions will be file based - and placement level NC data only. Part Shapes are where all the work is and if you want to convert part l
Electronics Forum | Wed Jan 06 12:51:39 EST 2016 | scotceltic
Is anyone aware of any easy to use conversion software that will take a current Fuji Flexa SMT program and create an ASM (Siemens) SMT program. I am aware of the 3rd party vendors (Circuitcam by Aegis, Valor etc.) but most of these require most or al
Electronics Forum | Tue Sep 12 16:55:19 EDT 2017 | mac5
Make Fuji provide the software, and convert some programs as part of the deal. Mac
