Electronics Forum | Thu Feb 10 13:54:22 EST 2000 | Kris W
Hi All, We are in the process of converting from RMA solder paste to no-clean process across the shop. This will allow me to carry my semi-aqueous cleaner out of the building and set it ablaze using the terpenes as the fire water. Then I can go ab
Electronics Forum | Tue Nov 09 20:06:26 EST 1999 | Robert Culpepper
This may help you regarding the V-Groove or scored board designs. With respect to material left, I did some experiments and found that for our process .009 of material seemed to be ideal. There was minimal stress required to break the boards apart ye
Electronics Forum | Tue Apr 07 15:55:37 EDT 1998 | Michael Allen
| I'm also in the "Don't score it" camp. Routed breakaways are much better. If your wave solder process has decent control on the wave height, you shouldn't worry about flooding the boards. | The fine pitch consideration for panelizing - Since you
Electronics Forum | Sun Sep 09 02:24:04 EDT 2012 | audere
More lube on the O-Rings caused lots of problems. Nozzles would drop downward at times. So I pulled everything out and started from scratch. Testing 3 new Z-Rods, 4 used Z-Rods in good shape (replaced the O-Rings) and around 20 nozzles - the proces
Electronics Forum | Sun Jul 26 22:35:55 EDT 1998 | D.Lange
Masdi, Try board shunts. They are hi-temp rubber strips with grooves cut. They can be popped on and off with ease and are much faster than taping and considerably cheaper. They also work great for masking goldfingers prior to wave soldering. Contac
Electronics Forum | Thu Jun 10 14:55:43 EDT 2004 | russ
It really depends on how you depanel these, If you are using a machine you can probably get away with the 1mm, If not, the 5mm is there to help reduce the cahnce of fracturing the component. Some interesting notes about having a defined keepout is
Electronics Forum | Fri Jun 11 18:36:57 EDT 2004 | russ
No Rob you didn't misunderstand, I forgot the decimal point! Lets try this .2" thick (I have built this and yes it was V-Scored) We didn't break any caps on that baby just fingers, that was the wildest VScore job I have ever seen I don't know how the
Electronics Forum | Fri Oct 22 07:31:24 EDT 2004 | davef
We're unclear about what you're seeking, but in order to move the conversation along, are you looking for: IPC-SM-782A - Surface Mount Design & Land Pattern Standard ANSI Approved Get up-to-date land pattern recommendations for ball grid array pac
Electronics Forum | Sun Dec 31 07:31:40 EST 2006 | davef
Thoughts are: * Eliminate solder spotting on gold fingers through process improvement in broard handling, printing paste control, and reflow recipe development. Search the fine SMTnet Archives for previous discussions. * Dispense or print a reflow te
Electronics Forum | Tue Jul 28 07:02:59 EDT 1998 | smd
Right now we are taping the goldfingers which is effective but also expensive. Also, some tape was leaving yellow marks on the goldfingers. We're trying the so-called goldfinger glove from Steven's Products. It's a very small company (probably one gu