Electronics Forum | Thu Apr 10 07:47:47 EDT 2008 | ck_the_flip
Stencil design and pad layout are key. Too far apart - bad. If your pad geometry is correct, try the inverted home plate. That has worked well for me in the past. That, coupled with a 5-mil stencil. With regard to solder paste, some manufacturer
Electronics Forum | Wed Mar 13 09:11:48 EDT 2013 | smt_guy
Hi All, Need your advice / help. We have assembleon pick-and-place machines and we got some pick-up issues on certain LED's that are Dome Type. The LED's get off from the tape pocket during feeding due to the dome of the LED sticks on the tape surfa
Electronics Forum | Sat Jun 07 23:37:34 EDT 2014 | demzvill
Hello all Good morning. I just want to ask with you guys about the problem that we always experienced in our production. We could not get our target ppm due. to inverted placement of chip resistor. We are using 2000 series juki mounter and cf03hp j
Electronics Forum | Mon Apr 24 11:44:53 EDT 2017 | emeto
It is good to have: conveyor after SPI(if you don't have SPI should be after the printer), conveyor before the oven(inspection station is better), conveyor after the oven - before your destacker if you have one. The rest of it, depends on how long li
Electronics Forum | Thu Feb 15 13:46:16 EST 2018 | aemery
Griinder, Maybe it's me, but I think what you might be saying here is that you see a reflected image of the PCB or Stencil when you and teaching the fiducials and it is interfering with the teaching routine, is that correct? If this is true it is c
Electronics Forum | Mon May 24 04:01:10 EDT 1999 | Joe Manzur
John, We are using a well known solder paste, begining with the letter "H". (I don't want to be accused of advertising). Also, we are now using a board inverter. In the early day's however, before we purchased a board inverter, we were having to
Electronics Forum | Mon Oct 04 11:28:46 EDT 1999 | Mark D.
Does anyone have a list of component types that can be put on the bottomside of a doublesided reflow board that will not fall off during the second pass (Or on the otherhand, a list of components that will fall off)? This would be a list of parts tha
Electronics Forum | Mon Oct 04 11:23:55 EDT 1999 | Mark D.
Does anyone have a list of component types that can be put on the bottomside of a doublesided reflow board that will not fall off during the second pass (Or on the otherhand, a list of components that will fall off)? This would be a list of parts tha
Electronics Forum | Fri Aug 27 10:25:52 EDT 1999 | Matthew Park
Is it feasible to have one type of board carriers to take boards thru 1) glue curing process for first side and 2)invert carriers with boards, and 3)reflowing second side, and 4) do manual stuffing of th components and 5) take them thru selective wav
Electronics Forum | Thu Jun 04 11:23:44 EDT 1998 | Frank S
If you could measure and chart 3 variables in my process, what would they be? The boards that I produce are on panels that are 12up and 2x4 up. All boards are single sided paper base w/o plated thru holes. They are on scored panels that measure 7"