Electronics Forum | Sat Jul 25 20:53:14 EDT 2009 | mika
Author: Jeff Subject: DEK SMEMA to UIC Conveyor Instead of using a conversion box just make your own cable. Look in the Dek manual, volume #2, chapter 18. It shows you how it's wired. Easy to make and looks allot cleaner than those conversion box
Electronics Forum | Wed Dec 30 15:05:18 EST 2009 | bobpan
Craig: Make sure you have done a table changeover and then when you go into teach tabletop there should be a tab at the top that says matrix trays. After selecting that ...choose the tray you want below and then right click on a part on the tray in t
Electronics Forum | Wed Mar 23 11:08:36 EDT 2011 | davef
There is no such standard, nor should there be. The important thing is to make good solder connections. That's IPC standardization focus, defining good results of manufacturing process. The approach that you take in developing the process of making g
Electronics Forum | Thu Dec 15 16:38:50 EST 2011 | davef
Sixth, make sure you have a feedback loop. Through the course of fixing problems, make sure the "fix" is incorporated back into program generation. For example, if a part definition is made or fixed, make sure the new definition or fixed part defin
Electronics Forum | Tue Jun 14 14:57:29 EDT 2022 | glasscake
Check for warp during reflow or placement, if your board is bowing you are not going to make a good solder connection. If your board is warping during reflow you may need to make a currier to support the board during reflow if using the edge to tran
Electronics Forum | Tue Dec 21 12:47:25 EST 1999 | Larry
Clarissa, Like any used equipment, make sure both you and the dealer know what you expect from the machine. Ask questions! Make sure you understand what is involved in the refurbishment, if anything. Things like Technical support will be important if
Electronics Forum | Mon May 16 12:39:48 EDT 2005 | JB
Agreed with the previous posts: *Make sure there is one empty nozzle changer per head. *Make sure there are no components on the nozzle changers that prvent the nozzle from seating flush with the changer. *make sure all nozzles are fully seated. *Ch
Electronics Forum | Thu Nov 17 13:04:58 EST 2005 | tommyttr
AOI should be operated by an INSPECTOR! Inspectors do not operate assembly machines or automated assembly equipment, why would an operator run an Automated Inspection? Are your operators certified to IPC standards to make calls on bad solder joints o
Electronics Forum | Wed Apr 26 06:51:11 EDT 2023 | poly
I'm looking to make dedicated tooling for my mpm stencil printer. We only make 3 different boards and they are the same size panel so I'm planning to make one bit of tooling for them. One board is 0.6 mm and sometimes I have problems with it not bein
Electronics Forum | Sun Nov 12 21:28:09 EST 2000 | Rchard Eigner
We are manufacturing a PCB that uses an integrated circuit that has a leg spacing of 10 mils, other components on the PCB are 1206's and 0805's. Is it possible to make the stencil apertures 10 mils apart or is there another way of making the stencil.
.gif)
