Electronics Forum | Sat Nov 08 21:48:42 EST 2014 | sonavc
ETC then you see TEACH. But I can't see it. Do my machine need to update the software or chane some thing in the Proper program?. I'm using MCS16 computer. So far the machine runs great , But take me awhile to move to correct fiducial location Thank
Electronics Forum | Tue Nov 11 21:21:54 EST 2014 | sonavc
Thank you, that is help, I always change in program and re-transmit. One more question, I program N_data with capacitor is TANTB (using M nozzles in part data). but when I run the program in machine it is always use S nozzles to pick the cap. TANTB
Electronics Forum | Thu Nov 13 13:12:57 EST 2014 | jimmyboz
Are you using MCS1 or MCS2 software on the MCS16? For MCS1 I would have to try and remember, haven't seen that software in 20 years. For MCS2 in the PD make sure nozzle size, nozzle size min, and nozzle size max are all set to Med.
Electronics Forum | Sun Sep 25 16:02:59 EDT 2005 | mark
The calibration was ok. When i switch off the back camera and use front one everything is ok. Is it true that when Topaz use back line camera after checking the components the machine rotates the components 180 degree?. Mark \
Electronics Forum | Wed Jan 04 13:28:03 EST 2006 | mark
hi thank you for informations. one questions this software GC-Powerplace is it automatic generation from Gerber or you have to teach it. Regards Mark
Electronics Forum | Mon Feb 20 17:12:54 EST 2006 | mark
Hallo all, I have recently had possibility to work with DEK265. I have met with problem poor print definition (no sharp edges). I used stencil 150 thickness, metal squuegees. I moved than the same stencil, squeegee and parameters to DEK nifinty and
Electronics Forum | Wed Feb 22 16:55:04 EST 2006 | mark
Hi, We are not using vaccum caps. The support pins for both printers is the same ande cover all board (components only on Top side of the PCB). I will check snap-off (right know setting 0.2-04. mm/s). I also suspected poor gasketing but clamps are o
Electronics Forum | Sat Jun 24 15:31:40 EDT 2006 | mark
Hello, We have found that many times for DEK265GS in under stencil cleaning unit stucks cleaning paper (non-woven rolls). DEK said that cleaning unit for DEK265 has this problem. I just looking for improvment to eliminate issue. Question to the u
Electronics Forum | Fri Jan 13 14:18:41 EST 2006 | mark
Hi, I would like to ask you how you test the PCB (electrical test) of first PCB before starting production.? What kind of equipment you are using? and method to confirm that components on PCB are correct (value, orientation, describtion, polarizatio
Electronics Forum | Fri Nov 19 22:31:30 EST 1999 | mark
Please be carefull handling these mechanical "foil only" systems. Many people have recieved serious cuts from the razor like foils. People to be concerned about include the reciever who takes it out of the box, the technician who has to mount it in a
