Electronics Forum | Thu Oct 07 09:38:22 EDT 1999 | Dave F
| Is anyone aware of a web page for military spec's? I am looking for Mil-P-28809. | | Thanks, | Mike Demos | Mike: My usual source, DSCC Columbus, gave this response to a search on "Mil-P-28809" Search Mil Specs & Drawings No basic specs, St
Electronics Forum | Tue Jul 07 12:52:02 EDT 1998 | Upinder Singh
Thanks Earl. Well following is the data regarding the product. 1. The panel consists of 21 boards. 2. The surface I mentioned would have 3 SMds and 1 T/hole connector. 3. PCB thickness is 55 mils and the width of the hole on the PCB for the thru-
Electronics Forum | Tue May 06 06:31:21 EDT 2003 | yukim
The stencil thickness was about 7 mils and was changed to 6 mils.
Electronics Forum | Thu Jun 26 21:38:31 EDT 2003 | Dreamsniper
Hi Guys, Need your good advice about this for a 5 thou stencil thickness: 0603 pad is 50mil x 40mil 0805 pad is 75mil x 45mil 1206 pad is 70mil x 50mil I want the above apertures to be in IPC STD Homeplate Design + an area reduction of 15%. Will t
Electronics Forum | Tue Feb 21 21:17:41 EST 2006 | Cal Kolokoy
M, The paste height is what you establish it as. You're probably using a laser measurement system, and these depend on where your reference datum is. Some will measure from a silkscreen, a trace, or solder mask. These add height, not to mention H
Electronics Forum | Tue Apr 04 11:51:44 EDT 2006 | dougs
10mil square apertures should be ok with your 4mil stencil.
Electronics Forum | Mon May 10 11:38:22 EDT 2010 | smt_guy
This is not for a BGA.
Electronics Forum | Mon May 10 17:07:45 EDT 2010 | pjc
Check out these guys: http://www.ysctech.com/
Electronics Forum | Wed Dec 20 10:04:07 EST 2017 | junkeymonkey246
Hello there, I work at Redcom Laboratories in Victor NY. I'm a student and new to being a machine repair technician. I'm having some bother with one of our TYCO QUAD QSP-2 machines. I keep getting the errors: "WARNING: Head#2 Nozzle RUNOUT=27.1 mi
Electronics Forum | Mon Aug 12 12:16:25 EDT 2019 | SMTA-Martial
Hi, We are using a 15mils to 5 mils step stencil with a metal blade. The 15mils area the surface is smooth and polish and in the 5mils area the surface is rough and porous because of the laser process. In the 5 mils area where there is no aperture t
