Electronics Forum | Fri Aug 06 17:19:46 EDT 2021 | SMTA-64387687
It seems to me that something is out of calibration. I noticed that you were reinstalling TPSys. Did this start after the reinstall? Did you restore a backup of your parameters, or recalibrate the machine with new values? Try changing the tools to "n
Electronics Forum | Tue Aug 06 08:55:07 EDT 2002 | Brandon
How do you calculate downtime of an SMT Line with 5 machines (1 Printer, 3 Pick and Place and 1 Oven)? Let's say that my stencil printer is down, since it is the beginning of my process my whole line is down. But if my 1st pick and place machine is
Electronics Forum | Tue May 08 21:13:04 EDT 2001 | Paul
My company is a low-volume high mix contact electronic manufacturer. We are currently looking at purchasing a pick and place machine that is capable of mounting such new components as microBGA's and other CSP's at such ball pitches as 0.5mm for examp
Electronics Forum | Mon Jun 06 16:09:03 EDT 2005 | avalancher
Grant, As a MYDATA user, your comments worry me. You state that the MDYATA's are not stable or reliable? I am currently placing 0201's with the HYDRA head (at appx 15K/hr) with 0.01% fallout/bad placement. I also place a large range of fine p
Electronics Forum | Fri May 05 05:56:54 EDT 2006 | sant
Hi After our internal meeting we end up with the selection of either Europlacer's X25 or Mydata's My15. we have a mix production , and 15-18 cph is fine for us. ofcourse mydata has a brad name. but europlacer also seems to be okay. It was learnt
Electronics Forum | Wed Feb 25 15:16:56 EST 2015 | dyoungquist
We have MY12 and MY15E machines. I am going to assume what we are seeing also applies to the MY100 series machines as well. Do you have the electrical verifier option that works with the midas head and centering jaws to check component values of
Electronics Forum | Wed Jul 17 17:56:38 EDT 2019 | rgduval
Check the MOT board. You can usually swap out the individual MOT boards, and see if the problem moves. If it does, you can isolate which board has gone bad. You can also check the encoder on the conveyor, to make sure that is still working correct
Electronics Forum | Tue Jun 29 11:46:56 EDT 2021 | stephendo
It's been a while but what about the nozzle? Is it still springy? And did you check the part data? At one place our machine would be metric or imperial depending on a visitor from HQ. If you are smashing parts on the board that isn't good and if you
Electronics Forum | Wed Jun 30 20:32:44 EDT 2021 | rgduval
Check the friction numbers...there could be an issue with the z-wagon bearings, or something else adding tension to the z-travel. Also make sure there are no cables interfering with the z-travel. Could be a cable that moves into the way at some spe
Electronics Forum | Wed Aug 04 23:32:05 EDT 2021 | tey422
Seem like sensor failed to detect the tool is fetched. You might want to try to clean the inside barrel of the fetch tool. Use the foam swab, to clean it. If it's a spring loaded tool that you trying to install, you have to make sure the top of the